


| Paramètre | Valeur |
|---|---|
| LED (green): Power / LED (yellow): (S1/S2) / LED (red): Failure | |
| EAN | 4048879063548 |
| PIN 1 | (+) |
| PIN 2 | Port 1...7: (NO)/(S2); Port 8: diagnostic |
| PIN 3 | (-) |
| PIN 4 | (NO)/(S1) |
| PIN 5 | (Earth) |
| eClass | 27279219 |
| Logement | Zinc die casting, matte nickel plated |
| Protection | IP65, IP67, IP68 inserted and tightened (EN 60529) |
| écran LED | LED (green): P1 and P2; LED (red): ERROR for optical diagnostics |
| Courant total | max. 10 A |
| unité d'emballage | 1 |
| Capacité de courant d'appel | max. 1470 µF |
| Protection de l'unité | Short-circuit, overload (PNP switching) |
| Verrouillage des ports | Screw thread (M12×1 mm) |
| Sortie de diagnostic | active high, max. load 25 mA, M23 - PIN 18 |
| Tension de fonctionnement | 24 V DC (EN 61131-2) |
| Plage de température | -20...+60 °C |
| pays d'origine | CZ |
| Dimensions H×L×P | 145×55×21 mm |
| Consommation de courant | max. 35 mA |
| Affichage LED par port | LED (yellow): contact 4 and 2; 2× LED (red): for failure |
| numéro de tarif douanier | 85369010 |
| Description fonctionnelle | All M12 ports are current monitored regarding 0 V total current (contact 3), and are switched off in case of overload or short-circuit (self-resetting). Operating voltage remains the same. In case of a fault the DIAGNOSTIC signal “active high” to the PLC |
| Courant de fonctionnement (contact 3) | max. 0.5 A (shutoff 0.7...0.9 A) |
| Alimentation requise avec un maximum de ports | min. 10 A |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation