En stock Produit phare
AFP0HCCS2
AFP0HCCS2 PANASONIC Communication cassette with 2 x RS232C (2x3 pin)
$0.00USD
4758 en stock
Spécifications clés
Article:Specifications
Remarque:Notes:1) The start and end codes can be used only for general-purpose serial communications.2) The unit No. (station number) can be selected at system register.3) Sufficient noise tolerance is provided but it is recommended that a user program be created for retransmission. (To improve the reliability of communications when a communication error occurs due to an excessive noise or when the target device cannot receive data temporarily.)4) When connecting a commercially available device that has an RS-485 interface, please confirm operation using the actual device. In some cases, the number of station units, transmission distance and communication speed vary depending on the connected device.5) The transmission distance, transmission speed, and number of stations should be within the range of the graph below, depending on each value.When the transmission speed is 19,200 bits/s, you can set up to 99 stations and up to 1,200 m3,937.008 fttransmission distance.
Interface:RS-232C 2 channels
Poids net:10 g approx.
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Remarque | Notes:1) The start and end codes can be used only for general-purpose serial communications.2) The unit No. (station number) can be selected at system register.3) Sufficient noise tolerance is provided but it is recommended that a user program be created for retransmission. (To improve the reliability of communications when a communication error occurs due to an excessive noise or when the target device cannot receive data temporarily.)4) When connecting a commercially available device that has an RS-485 interface, please confirm operation using the actual device. In some cases, the number of station units, transmission distance and communication speed vary depending on the connected device.5) The transmission distance, transmission speed, and number of stations should be within the range of the graph below, depending on each value.When the transmission speed is 19,200 bits/s, you can set up to 99 stations and up to 1,200 m3,937.008 fttransmission distance. |
| Interface | RS-232C 2 channels |
| Poids net | 10 g approx. |
| Numéro de pièce | AFP0HCCS2 |
| Nom du produit | FP0H communication cassettes |
| Numéro de produit | AFP0HCCS2 |
| Nombre de stations | - |
| Méthode synchrone | Start-stop synchronization system |
| vitesse de communication | 1,200(Note), 2,400(Note), 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec.(Note): System register no. 415 cannot be used to set the baud rate to 1,200 bps. To set the baud rate to 1,200 bps, use the SYS1 instruction. If the baud rate of any of the COM ports is 2,400 bps or lower, F-ROM access will slow down.Example) F12(ICRD) instruction, P13(ICWT) instruction, etc. |
| Méthode de communication | Half-duplex system |
| Distance de transmission | Max. 15 m49.213 ft |
| ordre de transmission de données | Transmit from bit 0 in character units. |
| Configuration de communication | 1 : 1 communication |
| Format de transmission : Parité | none / odd / even |
| Format de transmission : Code de fin | CR / CR + LF / none / ETX / Time (0 to 100 ms) |
| Format de transmission : bit d'arrêt | 1 bit / 2 bits |
| Format de transmission : Code de démarrage | with STX / without STX |
| Format de transmission : Longueur des données | 7 bits / 8 bits |
Description du produit
FP0H Communication Cassette. 2 RS232C Ports (3 wires)
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
