![DP-M2 - DP-M2 PANASONIC Micro-differential Pressure High-precision Digital Pressure Sensor [For Gas] DP-M](http://www.baigongbaohao.com/pic/685/994/dp-m2.jpg)
![DP-M2 - DP-M2 PANASONIC Micro-differential Pressure High-precision Digital Pressure Sensor [For Gas] DP-M](http://www.baigongbaohao.com/pic/685/994/dp-m2.jpg)

| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | 0.18 mm23-core oil resistant cabtyre cable, 2 m6.562 ftlong |
| Remarque | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉. |
| Poids | Net weight : 75 g approx., Gross weight : 135 g approx |
| Afficher | 3 digit red LED display (Sampling rate : 4 times/sec. approx.) |
| Produit | Micro-differential Pressure High-precision Digital Pressure Sensor [For Gas] |
| Matériel | Front case : ABS, Rear case : ABS, LED display : Acrylic, Pressure port : PA |
| Numéro de pièce | DP-M2 |
| Nom du produit | Micro-differential Pressure High-precision Digital Pressure Sensor [For Gas] DP-M(Discontinued) |
| orifice de pression | ø4.6 mmø0.181 inresin pipe(Note): For production before April 2015 : ø4.8 mmø0.189 in |
| Numéro de produit | DP-M2 |
| Tension d'alimentation | 12 to 24 V DC+10/-15% Ripple P-P 10 % or less |
| rallonge de câble | Extension up to total 100 m328.084 ft(less than 10 m32.808 ftwhen conforming to CE marking) is possible with 0.3 mm2, or more, cable. |
| Humidité ambiante | 35 to 85 % RH, Storage : 35 to 85 % RH |
| Fluide applicable | Non-corrosive gas |
| Degré de pollution | 3 (Industrial environment) |
| Unités sélectionnables | kPa, mmH2O |
| résistance aux chocs | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Type de pression | Differential pressure |
| Production comparative | NPN open-collector transistor・Maximum sink current : 100 mA・Applied voltage : 30 V DC or less (between comparative output and 0 V)・Residual voltage : 1 V or less (at 100 mA sink current)0.4 V or less (at 16 mA sink current) |
| Plage de pression définie | 0 to 2.00 kPa.D {0 to 204 mmH2O.D} |
| Température ambiante | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed),Storage: -10 to +60 ℃+14 to +140 ℉ |
| Consommation de courant | 50 mA or less |
| Plage de pression nominale | 0 to 2.00 kPa.D {0 to 204 mmH2O.D} |
| résistance aux vibrations | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Sortie de courant analogique | - |
| résistance d'isolation | 50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Indicateurs : Fonctionnement | Orange LED (lights up when the comparative output is ON) |
| Indicateurs : réglage M1 | Red LED (blinks in the M1 setting mode) |
| Indicateurs : réglage M2 | Red LED (blinks in the M2 setting mode) |
| Résolution de pression définie | 0.01 kPa.D {1 mmH2O.D} |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| résistance à la pression | 6 kPa.D {612 mmH2O.D} |
| Indicateurs : Unité de pression | Red LED (The indicator corresponding to the selected unit lights up during the sensing mode.) |
| caractéristiques de température | Over ambient temperature range 0 to +50 ℃+32 to +122 ℉: within ±3 % F.S. of detected pressure at +25 ℃+77 ℉ |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Sortie comparative : Hystérésis | 0.01 kPa.D {1 mmH2O.D} |
| Résultats comparatifs : Répétabilité | Within ±1 % F.S. |
| Résultat comparatif : Temps de réponse | 10 ms or less |
| Affichage : Plage de pression affichable | -0.05 to 2.10 kPa.D {-5 to 210 mmH2O.D} |
| Sortie comparative : Opération de sortie | Selectable either normally open (NO) or normally closed (NC) by the key |
| Production comparative : Catégorie d'utilisation | DC-12 or DC-13 |
| Sortie comparative : Protection contre les courts-circuits | Incorporated |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation