En stock Produit phare
DPH-102-C5
DPH-102-C5 PANASONIC Pressure sensor head DPH-100, 0 to 10bar, 1 to 5V, R1/8 male thread and M5 female threa..
$0.00USD
4042 en stock
Spécifications clés
Article:Specifications
Câble:0.2 mm24-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable)
Remarque:Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃+77 ℉.The sensor head can be used independently.
Détails:Sensor head
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | 0.2 mm24-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable) |
| Remarque | Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃+77 ℉.The sensor head can be used independently. |
| Détails | Sensor head |
| Produit | Head-separated Dual Display Digital Pressure Sensor [For gas] |
| Matériel | Front case : PBT, Rear case : PBT (glass fiber reinforced), Pressure port : Stainless steel (SUS303), O-ring : NBRPressure element : Silicon diaphragm, PPS |
| Protection | IP40 (IEC) |
| Accessoires | Connector (e-CON) : 1 pc. |
| Numéro de pièce | DPH-102-C5 |
| Nom du produit | Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100 |
| orifice de pression | R1/8male thread + M5 female thread. |
| Numéro de produit | DPH-102-C5 |
| Tension d'alimentation | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| rallonge de câble | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
| Humidité ambiante | 35 to 85 % RH, Storage : 35 to 85 % RH |
| Fluide applicable | Air, non-corrosive gas |
| résistance aux chocs | 1,000 m/s2acceleration (100 G approx.) in X, Y and Z directions for three times each |
| Type de pression | Gauge pressure |
| Méthode de connexion | Connector |
| Température ambiante | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage : -10 to +60 ℃+14 to +140 ℉ |
| Consommation de courant | 15 mA or less |
| Poids : Poids net | Head 10 g approx. / Cable 40 g approx. |
| Plage de pression nominale | 0 to +1.000 MPa |
| résistance aux vibrations | 10 to 500 Hz frequency, amplitude 3 mm0.118 inor maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each |
| Sortie de tension analogique | Output voltage : 1 to 5 V (over rated pressure range)Zero point : within 1 V ± 2.5 % F.S. (vacuum / positive pressure type)within 3 V ± 3 % F.S. (compound pressure type)Span : within 4 V ± 3.5 % F.S.Linearity : within ±0.5 % F.S.Output impedance : 1 kΩ approx. |
| résistance d'isolation | 50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Poids : Poids brut | 80 g approx. |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| résistance à la pression | 1.5 MPa |
| caractéristiques de température | Over ambient temperature range 0 to +50 ℃+32 to +122 ℉: within ±2 % F.S. of detected pressure at +25 ℃+77 ℉ |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
Description du produit
DPH100 sensor head, positive pressure 1 MPa, R1/8 thread male + M5 female, analog output 1-5 VDC, cable 5 m.
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
