


| Paramètre | Valeur |
|---|---|
| (Montage) | |
| M3 (Montage) | E3T-SL22M 2M |
| 1 m (Montage) | Light-ON |
| Plat (Montage) | Side-view |
| Article (Montage) | Diffuse-reflective |
| Objectif (Monture) | Denatured polyarylate |
| 300 mm (Montage) | Light-ON |
| Dark-ON (Montage) | M2 |
| E3T-FD1 (Montage) | E3T-SL1 |
| Stockage (Montage) | -40 to 70°C (with no icing or condensation) |
| Matériel (Montage) | Case |
| Vue de côté (montage) | Flat |
| 1 à 30 mm (Montage) | Light-ON |
| 5 à 30 mm (Montage) | Light-ON |
| Type de capteur (Montage) | Sensing distance |
| Traverse (Montage) | 500 mm |
| Temps de réponse (Montage) | 1 ms max. |
| Fenêtre d'affichage (Montage) | Denatured polyarylate |
| Rétro-réfléchissant (Montage) | 30 to 200 mmon reflectors/10 to 100 mmon reflective foils |
| Distance de détection (Montage) | 5 to 30 mm |
| Erreur noir/blanc (Montage) | - |
| Diffus-réfléchissant (Montage) | 5 to 30 mm |
| Réflecteur limité (Montage) | 5 to 15 mm |
| Température ambiante (montage) | Operating |
| Circuits de protection (Montage) | Power supply and control output reverse polarity protectionOutput short-circuit protection, Mutual interference prevention |
| Degré de protection (Montage) | IEC60529 IP67 |
| Tension d'alimentation (Montage) | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| E3T-ST1 E3T-ST2 E3T-ST3 (Montage) | E3T-FT1E3T-FT2 |
| Source lumineuse (longueur d'onde) (Montage) | Red LED (“Pin-point” LED) λ = 650 nm |
| Diffus-réfléchissant (suppression du fond) (Montage) | 1 to 15 mm |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation