


| Paramètre | Valeur |
|---|---|
| Fiber amplifierconnector | |
| PNP | 53 µs for operation and 55 µs for reset |
| Article | Order code (for pre-wired types with 2 m cable length) |
| Forme | Type |
| Fonctions | Power tuning |
| Sortie NPN | PNP output |
| Sortie PNP | E3X-DAH41-S, E3X-DAH8-S |
| Temps de réponse | Super-high-speed mode |
| Mode standard | 1 ms for operation and reset respectively |
| lumière infrarouge | E3X-DAH11-S 2M |
| Fonction de minuterie | Select from OFF-delay, ON-delay, or one-shot timer. 1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| Affichages numériques | Incident level + threshold or user specific |
| circuits de protection | Power supply reverse polarity protection, output short circuit protection, mutual interference prevention |
| Réglage de la sensibilité | Teaching and digital up/down keys |
| Degré de protection | IEC 60529 IP50 (with protective cover attached) |
| Mode haute résolution | 4 ms for operation and reset respectively |
| tension d'alimentation | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| Source lumineuse (longueur d'onde) | Infrared LED |
| Lumière infrarouge (connecteur d'amplificateur à fibre)1 | E3X-DAH6-S |
| Câble PVC de 30 cm avec connecteur M8 (4 broches) | E3X-CN21-M3J-2 0.3M |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation