En stock Produit phare
FM-215-8
FM-215-8 PANASONIC flow sensor FM200, 100l/minø8,NPN
$0.00USD
3138 en stock
Spécifications clés
Article:Specifications
Poids:Net weight: 70 g approx., Gross weight: 135 g approx.
Détails:Resin body type
Afficher:4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Poids | Net weight: 70 g approx., Gross weight: 135 g approx. |
| Détails | Resin body type |
| Afficher | 4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| Produit | Integrated Display Type Digital Flow Sensor |
| Matériel | Enclosure: ABS, Body: Polyamide (Aluminum body type: Aluminum), Switch: EPDM, Display: Acrylic, Mounting screw part (Resin body type): Brass Current plate / Port filter: Stainless steel (used for the gas contact area), Sensor chip: Silicon, Gasket: Fluorine rubber |
| Linéarité | Within ±3 % F.S. (Ambient temperature +25 ℃ +77 ℉, flow rate range 3 to 100 % F.S., atmospheric criteria on secondary side) |
| Taille du port | ø8 ø0.315 push-in |
| Protection | IP40 (IEC) |
| Accessoires | CN-F15-C1 (Connector attached cable 1 m 3.281 ft): 1 pc. |
| Numéro de pièce | FM-215-8 |
| longueur du câble | Total length up to 10 m 32.808 ft is possible with 0.3 mm2, or more, cable. |
| Nom du produit | Integrated Display Type Digital Flow Sensor FM-200 |
| Répétabilité | Within ±1 % F.S. |
| Entrée externe | ON voltage: 0 to +0.4 VOFF voltage: +5 V to +V, or openInput time: 80 ms or more |
| Numéro de produit | FM-215-8 |
| Tension d'alimentation | 12 to 24 V DC ± 10 % Ripple P-P10 % or less |
| Humidité ambiante | 35 to 90 % RH, Storage: 35 to 90 % RH |
| Fluide applicable | Clean air, compressed air, nitrogen gas(Note):The clean air complies with JIS B 8392-1.1.1 to 5.6.2, and the compressed air complies with JIS B 8392-1.1.1 to 1.6.2. |
| résistance aux chocs | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Méthode de connexion | Connector |
| Production comparative | NPN open-collector transistor・Maximum sink current: 50 mA or less・Applied voltage: 26.4 V DC or less (between comparative output and 0 V)・Residual voltage: 2.4 V or less (at 50 mA sink current) |
| Mise à la terre du boîtier | Floating(Note):As a varistor (clamping voltage: approx. 40 V) is connected to the aluminum body type, do not apply voltage higher than the rated voltage of the sensor. |
| Température ambiante | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉ |
| Consommation de courant | Normal mode: 60 mA or less, ECO mode: 40 mA or less |
| débit à pleine échelle | 100 ℓ/min.(Note):Converted to volumetric flow at +20 ℃ +68 ℉ and 1 atmospheric pressure (101 kPa). |
| Plage de pression nominale | -0.09 to +0.7 MPa |
| résistance aux vibrations | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or 49 m/s2max. acceleration, in X, Y and Z directions for two hours each |
| Sortie de tension analogique | Output voltage: 1 to 5 V, Output impedance: 1 kΩ approx.[Refer to "Analog voltage output" for more details.] |
| résistance d'isolation | 10 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| Plage d'assurance de précision | Bi-direction : -100 to -3 % F.S., +3 to +100 % F.S.One-side direction : +3 to +100 % F.S.(Note):Take care that if fluid flows in the vicinity of zero-point which is out of the accuracy assurance range, the instant flow rate value may forcibly display "zero", or the integrated flow display value may not be counted up, or the integrated pulse output may not be outputted. |
| Caractéristiques de pression | Within ±5 % F.S. (-0.09 to +0.7 MPa, +25 ℃ +77 ℉, atmospheric criteria on secondary side) |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| résistance à la pression | 1 MPa |
| Valeur intégrée spécifiée | 1 ℓ |
| caractéristiques de température | Within ±0.2 % F.S./℃ (+25 ℃ +77 ℉ criteria, +15 to +35 ℃ +59 to +95 ℉ ambient temperature range) |
| Résultats comparatifs : hystérésis | Window comparator mode: 1 to 8 % F.S. approx. (variable) (Factory settings: approx. 1 % F.S.), Hysteresis mode: Variable (minimum 1 digit) |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Sortie comparative : modes de sortie | Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode |
| Débit instantané : Plage d'affichage | -110 to +110 ℓ/min.(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| Résultat comparatif : Temps de réponse | 50 ms, 80 ms, 120 ms, 200 ms, 400 ms, 800 ms, 1,500 ms, selectable by key operation |
| Débit intégré : Plage d'affichage | ±999999.9 ℓ(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| Sortie comparative : Protection contre les courts-circuits | Incorporated |
| Débit instantané : Réglage et résolution d’affichage | 0.1 ℓ/min. |
| Débit intégré : Réglage et résolution d’affichage | 0.1 ℓ |
Description du produit
More details
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
