


| Paramètre | Valeur |
|---|---|
| Non (Spécifications et informations de commande) | 4 poles |
| Chargement (Spécifications et informations de commande) | Resistive load (cosφ= 1) |
| Type (Spécifications et informations de commande) | Sealing |
| 24 VCC (Spécifications et informations de commande) | 4 poles: 15 mA6 poles: 20.8 mA |
| 6 poteaux (Spécifications et informations de commande) | P7SA-14P |
| Montage (Spécifications et informations de commande) | Terminal type |
| Standard (Spécifications et informations de commande) | Flux-tight |
| Durabilité (Spécifications et informations de commande) | Mechanical |
| Caractéristiques électriques (Spécifications et informations de commande) | 100,000 operations min. (at the rated load and approx. 1,800 operations/hr) |
| Charge nominale (Spécifications et informations de commande) | 6 A at 250 VAC, 6 A at 30 VDC |
| Montage arrière (Spécifications et informations de commande) | PCB terminals |
| Tension nominale (Spécifications et informations de commande) | Rated current |
| Date de sortie 1 (Spécifications et informations de commande) | 20 ms max. |
| Montage frontal (Spécifications et informations de commande) | Push-In Plus terminals |
| Délai de réponse¹ (Spécifications et informations de commande) | 10 ms max.(The response time is the time it takes for the normally open contacts to open after the coil voltage is turned OFF.) |
| Durée de fonctionnement² (Spécifications et informations de commande) | 20 ms max. |
| Bornes à vis (Spécifications et informations de commande) | Yes |
| 3PST-NO, 3PST-NC (Spécifications et informations de commande) | G7SA-3A3B |
| 4PST-NO, DPST-NC (Spécifications et informations de commande) | G7SA-4A2B |
| Humidité ambiante (Spécifications et informations de commande) | Operating: 35 to 85% |
| DPST-NO, DPST-NC (Spécifications et informations de commande) | G7SA-2A2B |
| Normes approuvées (Spécifications et informations de commande) | EN61810-1 (IEC61810-1), EN50205, UL508, CSA22.2 No. 14 |
| Résistance de contact (Spécifications et informations de commande) | 100 mΩ max. (The contact resistance was measured with 1 A at 5 VDC using the voltage-drop method.) |
| Courant de transport nominal (Spécifications et informations de commande) | 6 A |
| Température ambiante6 (Spécifications et informations de commande) | Operating: −40 to 85°C (with no icing or condensation) |
| Rigidité diélectrique34 (Spécifications et informations de commande) | Between coil contacts/different poles: 4,000 VAC, 50/60 Hz for 1 min(2,500 VAC between poles 3-4 in 4-pole Relays or poles 3-5, 4-6, and 5-6 in 6-pole Relays.)Between contacts of same polarity: 1,500 VAC, 50/60 Hz for 1 min |
| Résistance d'isolement (Spécifications et informations de commande) | 100 MΩ min. (at 500 VDC) (The insulation resistance was measured with a 500 VDC megger at the same places that the dielectric strength wasmeasured.) |
| Courant de commutation maximal (Spécifications et informations de commande) | 6 A |
| Tension de commutation maximale (Spécifications et informations de commande) | 250 VAC, 125 VDC |
| Charge admissible minimale5 (Spécifications et informations de commande) | 5 VDC, 1 mA (reference value) |
| Capacité de commutation maximale (valeur de référence) (Spécifications et informations de commande) | 1,500 VA, 180 W |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation