En stock Produit phare
HBG-240-60BOL2
HBG-240-60BOL2 MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 60 VDC / 4.0A, IP67, for in-..
$0.00USD
4899 en stock
Spécifications clés
Nom (Détails):HBG-240-60BOL2
État (Détails):Recommended Model
Stock (Détails):Yes
Format (Détails):Box
Informations sur le fournisseur
MEANWELL
Produits : 6448
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Nom (Détails) | HBG-240-60BOL2 |
| État (Détails) | Recommended Model |
| Stock (Détails) | Yes |
| Format (Détails) | Box |
| Série (Détails) | HBG-240-B |
| Approbations (Détails) | CCC, CE, EAC, ENEC, UL |
| Puissance (W) (Détails) | 240,00 |
| Règlement (Détails) | 1-10V, Resistance 0-100K, PWM Signal 10V |
| Subformato (Détails) | IP67 |
| Largeur (mm) (Détails) | 191.50 |
| Hauteur (mm) (Détails) | 69.00 |
| Entrée CA max. (Détails) | 305,00 |
| Entrée CA min (Détails) | 90,00 |
| Applications (Détails) | Lighting |
| Fabricant (Détails) | OLFER |
| Type de produit (Détails) | LED Driver |
| Isolement (V) (Détails) | 3.750,00 |
| Puissance crête (W) (Détails) | Two hundred forty |
| Connecteur d'entrée (Détails) | Cable |
| Fréquence d'entrée (Détails) | 50 Hz, 60 Hz |
| Contexte/Détails (Longue durée) | 191.50 |
| Description longue (Détails) | LED driver dimmablewith modification of output cables.Specially designed for powering LEDs directly in a steady stream.Format, round, plastic, patented, waterproof,IP67.Input range90-305Vca47-63Hz.Output in constant current4A.Range of output voltage with current mode constant36 to 60Vccaccording to demand load.Power:240W.Efficiency typical:93,5%.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0,95to 230vac at full load.Output leads V+ and V - modified 350mm for use CoolBay Tera.Operating temperature range of caseTcfrom-40ºCup+75ºC.Dimensions (Diameter x Height):191,5 x 69mm.5 years of warranty.Manufacturer: OLFER.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This version has the output leads V+ and V - modified 350mm long (240mm cable with a hose and 110mm with only the black cable and red) so that you can use the sinks in the range CoolBay Tera in the mounting of the bells.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.You can also work in voltage mode constant giving a fixed voltage of 60V if the load is powered at constant voltage and does not overcome the maximum output power.With shell circular plastic IP67. The series HBG is specially designed for the bells and LED spotlights, scenarios, and bays. Intended for applications in dry, damp or wet, both in exterior and in interior. Input class I with grounding.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Connecteur de sortie (Détails) | Cable |
| Type d'entrée CA (Détails) | Single-phase |
| Garantie (années) (détails) | 5,00 |
| Pays d'origine (détails) | China |
| Courant de sortie mA (Détails) | Four thousand |
| Intensité de sortie minimale (mA) (Détails) | 4.000,00 |
| Intensité de sortie maximale (mA) (Détails) | 4.000,00 |
Description du produit
More details
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Détails techniques
LED driver dimmablewith modification of output cables.
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
