

| Paramètre | Valeur |
|---|---|
| IP68 (0.2 bar 24 h) | |
| Note | For contact inserts HC-B16, BB32, D40, DD72, HS6, HV6, M, K |
| Taper | B32 |
| Largeur | 94 mm |
| Hauteur | 110 mm |
| Longueur | 126 mm |
| Couple | 3 Nm (Locking screw) |
| Sortie de câble | Lateral |
| Connexion | To ensure optimum shielding, any insulating power coating must be removed from the profile gasket area on the control cabinet panel. Tightening torque of locking screw: 3 Nm. |
| Type de logement | Sleeve housing |
| Type de verrouillage | Screw locking |
| vis de fixation | M6 (screw head: 5 mm Allen screw) |
| Verrouillage matériel | High-grade steel |
| matériau d'étanchéité | NBR, conductive |
| Matériau du boîtier | Die-cast aluminum, salt water resistant |
| Raccord à vis | none |
| Nombre de prises de câble | 1 |
| Instructions de montage | In order to guarantee that the ground conductor contact functions even when plugged in at an angle, the two panel mounting flanges must have sufficient electrical contact with the metal mounting panel. |
| matériau de surface du boîtier | Uncoated |
| Type de raccord à vis | 1x M32 |
| Width of the assembly cutout | 71 mm |
| Length of the assembly cutout | 86 mm |
| Température ambiante (fonctionnement) | -40 °C ... 125 °C |
| Degré de protection du logement (PI) | IP66 |
| Degree of protection of housing (NEMA) | 4 (UL50e / NEMA 250) |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation