

| Paramètre | Valeur |
|---|---|
| DIN VDE 0110/02.79 | |
| Note | For HC-D8 housing, crimp contacts CK1,6-ED (crimp contacts not included in scope of supply) |
| Taper | D8 |
| Connexion | The inserts may only be used in plastic housings at voltages >42 V, since it is not possible to connect the protective conductor and the housing with each other. |
| Courant nominal | 10 A |
| Matériel de contact | Copper alloy |
| Degré de pollution | 3 |
| Méthode de connexion | Crimp connection |
| Nombre de positions | 8 |
| Tension de surtension nominale | 0.8 kV |
| Catégorie de surtension | III |
| Instructions de montage | Connectors may be operated only when there is no load/voltage. |
| Tension nominale (III/3) | 50 V |
| Section transversale du conducteur | 0.14 mm² ... 2.5 mm² |
| Matériau porteur de contact | PA |
| matériau de surface de contact | Ag (alternatively Au) |
| Cycles d'insertion/retrait | ≥ 500 |
| Section de connexion AWG | 26 ... 14 |
| Température ambiante (fonctionnement) | -40 °C ... 125 °C (including heating up of contacts) |
| Connexion conforme aux normes | IEC / EN |
| Constructional and testing regulations | DIN VDE 0627/86 |
| Indice d'inflammabilité selon la norme UL 94 | V0 |
| Longueur de dénudage du fil individuel | 8 mm |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation