En stock Produit phare
HC-M-HS 200/40-MOD-ST-PE
HC-M-HS 200/40-MOD-ST-PE 1637184 PHOENIX CONTACT Contact insert module
$0.00USD
4949 en stock
Spécifications clés
GTIN:4046356095235
Note:Made to Order (non-returnable)
Clé de commande:1637184
page du catalogue:Page 551 (C-4-2015)
Informations sur le fournisseur
Produits : 0
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| GTIN | 4046356095235 |
| Note | Made to Order (non-returnable) |
| Clé de commande | 1637184 |
| page du catalogue | Page 551 (C-4-2015) |
| Unité d'emballage | 1 pc |
| Pays d'origine | DE (Germany) |
| numéro de tarif douanier | 85366990 |
| (Conditions ambiantes) | 16 mm (70 mm²) |
| quantité minimale de commande | 100 pc |
| Matériel de contact (Général) | Copper alloy |
| Rated current (Dimensions) | 200 A |
| Largeur (Données commerciales clés) | 34.2 mm |
| Taille (Données commerciales clés) | 54.5 mm |
| Longueur (Données commerciales clés) | 29.4 mm |
| Connection profile (Dimensions) | PE |
| Matériau support de contact (Général) | PC |
| Matériau de la surface de contact (Généralités) | Ag |
| Series (Mechanical characteristics) | HC-M-HS |
| Poids par pièce (emballage exclu) | 98.500 g |
| Hexagonal socket (Ambient conditions) | WAF 5 |
| Couple de serrage (conditions ambiantes) | 8 Nm (25 mm² ... 35 mm²) |
| Connection (Mechanical characteristics) | Note on axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Use of cables with a geometric cross section that differs greatly from the nominal cross section of the cable should be checked before use.The wiring space for axial screw technology is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) should be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The wires should be inserted as far as they will go into the contact chamber (until the insulation touches the contact). Hold the wires in position and use the socket wrench to tighten. The used wire end should be cut off before connecting again. The connection screw may only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable should be mechanically intercepted at an appropriate distance from the connection point (e.g., by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. The module cannot be used simultaneously with HC-B..-TMB-SD-IP65 and HC-B..-TMS-SD-IP65 protective covers.PE mounting plateThe PE plate must be pressed hard against the swing frame using the 4 screws. First loosen the 4 screws of the PE plate and then tighten them again once the module is fixed in the swing frame. |
| Minimum housing height (Ambient conditions) | 72 mm |
| Section transversale du conducteur (conditions ambiantes) | 25 mm² ... 40 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| Connection method (Mechanical characteristics) | Axial screw connection |
| Connection in acc. with standard (Material data) | UL |
| Cycles d'insertion/retrait (conditions ambiantes) | ≥ 500 |
| Connection cross section AWG (Ambient conditions) | 3 ... 2 |
| Assembly instructions (Mechanical characteristics) | - Use only flexible conductors,- Connection of wires with 5 mm an Allen wrench,- Housing height h ≥ 72 mm,- Connectors may only be operated without load/voltage. |
| Number of module slots (Mechanical characteristics) | 2 |
| Indice d'inflammabilité selon la norme UL 94 (Données sur les matériaux) | V0 |
| Diamètre du fil, isolation comprise (conditions ambiantes) | 12 mm (40 mm²) |
| Ambient temperature (operation) (Electrical characteristics) | -40 °C ... 125 °C |
| Stripping length of the individual wire (Ambient conditions) | 16 mm |
| Indice d'inflammabilité selon la norme UL 94 (Caractéristiques mécaniques) | V0 |
Description du produit
More details
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
