En stock Produit phare
LCM-25DA
LCM-25DA MEANWELL AC-DC Multi-Stage Output LED driver Active PFC, Output 0.35A/0.6A/0.7A/0.9A/1.05A, DALI an..
$0.00USD
3662 en stock
Spécifications clés
Nom:LCM-25DA
Pouvoir:18,9 W
État:Recommended Model
Action:Yes
Informations sur le fournisseur
MEANWELL
Produits : 6448
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Nom | LCM-25DA |
| Pouvoir | 18,9 W |
| État | Recommended Model |
| Action | Yes |
| Format | Box |
| Série | LCM-25DA |
| Atténuation | DALI, Push-button |
| Approbations | CCC, CE, ENEC, UL |
| Puissance (W) | 25,20 |
| Sous-format | IP20 |
| Largeur (mm) | 68.00 |
| Hauteur (mm) | 23.00 |
| Entrée CA Max | 277,00 |
| Entrée CA Min | 180,00 |
| Applications | Lighting |
| Fabricant | MEAN WELL |
| Type de produit | LED Driver |
| Isolation (V) | 3.750,00 |
| Courant de sortie | 350mA |
| Puissance de crête (W) | 25.2 |
| Connecteur d'entrée | Quick Connector |
| Fréquence d'entrée | 50 Hz, 60 Hz |
| Contexte long | 105.00 |
| Description longue | LED driver dimmable..Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP20.Input range180-277Vca47-63Hz.Current output selectable by micro-switch350, 500, 600, 700, 900 or 1050mA.Output current350mA500mA600mA700mA900mA1050mAPower18,9 W25,2 W25,2 W25,2 W25,2 W25,2 WRange of Output Voltage6-54Vcc6-50Vcc6-42Vcc6-36Vcc6-28Vcc6-24vdcEfficiency typical:86%.Regulation DALI0% to 100% of the intensity of output or push-button (PUSH-DALI). Certificate to DALI.We can regulate by push-button by connecting the input line cord to a push-button normally open and then to the Push (up-regulation in primary). You can connect any number of drivers LCM-GIVES the same push-button.Synchronization: we can sync up10 unitsvia the wires LCM-xxx-SYNC25 in such a way that by regulating a source other do the same regulation without the need to be connected to the bus DALI or push-button. We also make sure that if we use dimming by push button fonts are not desincronizarán.Input class II without grounding.Factor corrector, power>0.94to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-30ºCup+60ºC.Dimensions (Length x Width x Height):105 x 68 x 23mm.3 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.Be sure to adjust the output current desired using the selector current. For more information please see the datasheet in the section attachments.With plastic housing, designed for applications of LED lighting and architectural. Suitable for indoor lighting, offices, LED panels.Low ripple current, no flicker (flicker-free).Compatible with any system DALI. |
| Connecteur de sortie | Quick Connector |
| Type d'entrée CA | Single-phase |
| Garantie (années) | 3,00 |
| Pays d'origine | China |
| Courant de sortie mA | 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050 |
| Plage de tension de sortie | 6-54Vcc |
| Intensité de sortie minimale (mA) | 350,00 |
| Intensité de sortie maximale (mA) | 1.050,00 |
Description du produit
More details
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Détails techniques
LED driver dimmable..
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
