

| Paramètre | Valeur |
|---|---|
| • WARNING: Serve only products in perfect condition. Products should be checked regularly for damage. Remove defective products immediately. Replace damaged products. It is not possible to repair them. | |
| Général | Look at the rating curve. |
| Altitude | 2000 m |
| Type de serrure | for ONECLICK and standard quick lock |
| Face de prise | 8+1 |
| Observation | In the case of connection cross-section max. |
| Cycles de bougies | 100 |
| Type de fil | M23 |
| application | Signal |
| Codification | N |
| Type de produit | Circular connector (cable side) |
| Consignes de sécurité | WARNING: Connectors should not be plugged in or unplugged under load. Failure to comply and improper use can result in property damage and personal injury. |
| matériau de la coquille | GD-Zn |
| Catégorie de pic | Ii |
| Type de connexion | Welding connection |
| Matériau du joint | FKM |
| Hauteur de montage | 2000 m |
| Tension nominale | 300 V |
| Nombre de poteaux | 9 |
| Presse-étoupes Pg | without |
| Degré de pollution | 3 |
| Diamètre extérieur du câble | 4 mm ... 8.5 mm |
| Sens de rotation | Standard |
| Température permanente | 125 °C (DIN EN 60512-9-2 / 1000 h) |
| Type de commutation de contact | Female |
| Matériau : Corps isolant | PBT |
| Indice de protection (inséré) | IP66 / IP68 (2 m / 24 h) |
| Courant nominal Contacts de puissance | 20 A |
| Température ambiante (Service) | -40 °C ... 105 °C (see derating) |
| Diamètre des contacts Contacts de puissance | 2 mm |
| Dimensionnement de la tension transitoire | 2.5 kV |
| Diamètre des contacts Contacts de signal | 1 mm |
| Tension nominale Contact d'avertissement | 300 V |
| Courant nominal par contact de signalisation | 8 A |
| Section de fil tressé Contacts de puissance Max. | 2.5 mm² |
| Section de fil tressé Contacts de puissance min. | 0.08 mm² |
| Section de fil tresséContacts de signalMax. | 1 mm² |
| Section de fil tressé Contacts de signal min. | 0.08 mm² |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation