


| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Arbre | Round shaft |
| Série | MBMU |
| Produit | Brushless Motors |
| Caractéristiques | Speed control type, 50 W ・90 W・130 W, Input power supply for Amplifier: Voltage AC 100 V/200 V, Rated speed 3000 r/min |
| Joint d'huile | without |
| Masse (kg) | 1.2 |
| Numéro de pièce | MBMU1E2AS |
| Nom du produit | MINAS-BL GV Series |
| Puissance nominale | 130 W |
| Classe de protection | IP65 |
| –À propos de l'enceinte | Excluding the shaft pass-through section and cable end connector.These motors conform to the test conditions specified in EN standards (EN60529, EN60034-5).Do not use these motors in application where water proof performance is required such as continuous wash-down operation. |
| Dimension carrée de la bride | 90 mm sq. |
| classe d'isolation du moteur | 130(B) (UL certified 105 (A)) |
| Couple nominal (N ⋅ m) | 0.41 |
| Spécifications de tension | 200 V |
| Plage de contrôle de vitesse (tr/min) | 30 to 4000* Adjustment of the parameters is necessary depending on the workload conditions. |
| Vitesse de rotation nominale (tr/min) | 3000 |
| –À propos de la vitesse de rotation nominale | Motor shaft speed: to be multiplied by the reduction ratio when the gear head is used. |
| Moment d'inertie du rotor ( x10-4kg ⋅ m²) | 0.36 |
| Couple de démarrage (valeur représentative) (N ⋅ m) | 0.62 |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation