


| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Taper | Ultra low inertia |
| Arbre | Key-way, center tap |
| Produit | Servo Motor |
| Caractéristiques | Compact Servo Only for Position Control. |
| Joint d'huile | without |
| Enceinte | IP65 |
| Masse (kg) | 0.96 |
| Numéro de pièce | MUMA022P1S |
| Nom du produit | MINAS E series Servo Motor |
| Puissance nominale | 200 W |
| Frein de maintien | without |
| À propos de l'enceinte | Except rotating portion of output shaft and leadwire end. |
| Couple nominal (N ⋅ m) | 0.64 |
| Spécifications de tension | 200 V |
| Courant nominal (A (rms)) | 1.6 |
| Conditions environnementales | For more details, please refer to the instruction manual. |
| Encodeur rotatif : Résolution | 10000 |
| Vitesse de rotation nominale (tr/min) | 3000 |
| Encodeur rotatif : spécifications | 2500 P/r Incremental |
| À propos de la fréquence de freinage régénératif | Note) 1. Regenerative brake frequency represents the frequency of the motor's stops from the rated speed with deceleration without load.⋅ If the load is connected, frequency will be defined as 1/( m + 1 ), where m = ( load moment of inertia ) / ( rotor moment of inertia ).⋅ When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to the square of ( running speed / rated speed ).⋅ Power supply voltage is AC115 V ( at 100 V of the main voltage ). If the supply voltage fluctuates, frequency is in inverse proportion to the square of ( Running supply voltage /115 ) relative to the value in the table.⋅ When regeneration occurs continuosly such cases as running speed frequently changes or vertical feeding, consult us or a dealer.Note) 2. If the effective torque is within the rated torque, there is no limit in regenerative brake. |
| Vitesse de rotation maximale nominale (tr/min) | 5000 |
| Couple de pointe maximal instantané (N ⋅ m) | 1.91 |
| Fréquence de freinage régénératif (fois/min) | Without option :No limitWith option :No limitOption (External regenerative resistor) Part No. : DV0P2891 |
| Moment d'inertie du rotor ( x10-4kg ⋅ m²) | 0.10 |
| Rapport des moments d'inertie recommandé entre la charge et le rotor | 30 times or less |
| Concernant le rapport recommandé des moments d'inertie de la charge et du rotor | Note) 3. Consult us or a dealer if the load moment of inertia exceeds the specified value. |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation