En stock Produit phare
PM-K64P
PM-K64P PANASONIC u-shape type, 5mm, PNP, connector
$0.00USD
3861 en stock
Spécifications clés
Article:Specifications
Sortir:PNP open-collector transistorMaximum source current: 50 mAApplied voltage: 30 V DC or less (between output and +V)Residual voltage: 0.7 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
Poids:Net weight: 3 g approx.
Matériel:Enclosure: PBT, Slit cover: Polycarbonate
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Sortir | PNP open-collector transistorMaximum source current: 50 mAApplied voltage: 30 V DC or less (between output and +V)Residual voltage: 0.7 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current) |
| Poids | Net weight: 3 g approx. |
| Matériel | Enclosure: PBT, Slit cover: Polycarbonate |
| Hystérèse | 0.05 mm 0.002 in or less(Note) This is the value when a sensing object is moved in a lateral direction to the U-shape. |
| Numéro de pièce | PM-K64P |
| Nom du produit | Connector Built-in U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-64(Discontinued) |
| Répétabilité | 0.01 mm 0.004 in or less(Note) This is the value when a sensing object is moved in a lateral direction to the U-shape and when the inserting length of the sensing board is 5 mm 0.197 in. |
| temps de réponse | Under light received condition: 20 micros or less, Under light interrupted condition: 100 micros or less(Response frequency: 1 kHz or more) |
| Portée de détection | 5 mm 0.197 in (fixed) |
| longueur du câblage | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.(Note) Confirm that the sensor terminal voltage is more than 4.5 V when using an extension of over 20 m 65.617 ft. |
| Numéro de produit | PM-K64P |
| Tension d'alimentation | 5 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Humidité ambiante | 35 to 85 % RH, Storage: 5 to 95 % RH |
| Élément émetteur | Infrared LED(Peak emission wavelength: 940 nm 0.037 mil, non-modulated) |
| résistance aux chocs | 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions for three times each |
| Éclairage ambiant | Fluorescent light: 1,000 lx at the light-receiving face |
| Température ambiante | -25 to +55 degrees -13 to +131degrees Fahrenheit(No dew condensation or icing allowed), Storage: -30 to +80 degrees -22 to +176degrees Fahrenheit |
| Consommation de courant | 15 mA or less |
| Indicateur de fonctionnement | Orange LED (lights up under light received condition) |
| résistance aux vibrations | 10 to 2,000 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each |
| résistance d'isolation | 50 MOhm, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Objet de détection minimal | 0.8 x 1.8 mm 0.031 x 0.071 in opaque object |
| Sortie : Opération de sortie | Incorporated with 2 outputs: Light-ON / Dark-ON |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Description du produit
More details
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
