


| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | 0.09 mm2 4-core cabtyre cable, 1 m 3.281 ft long |
| Sortir | NPN open-collector transistorMaximum sink current: 50 mAApplied voltage: 30 V DC or less (between output and 0 V)Residual voltage: 0.7 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Poids | Net weight: 15 g approx. |
| Détails | Small With cable K type |
| Produit | Small U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-44/PM-54 |
| Matériel | Enclosure: PBT, Slit cover: Polycarbonate |
| Hystérèse | 0.05 mm 0.002 in or less |
| Numéro de pièce | PM-K44 |
| Nom du produit | Small U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-44/PM-54(Discontinued) |
| Répétabilité | 0.03 mm 0.001 in or less |
| temps de réponse | Under light received condition: 20 micros or lessUnder light interrupted condition: 100 micros or less(Response frequency: 1 kHz or more) |
| Portée de détection | 5 mm 0.197 in (fixed) |
| longueur du câblage | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Numéro de produit | PM-K44 |
| Tension d'alimentation | 5 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Élément émetteur | Infrared LED (Peak emission wavelength: 940 nm 0.037 mil, non-modulated) |
| résistance aux chocs | 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions for three times each |
| Éclairage ambiant | Fluorescent light: 1,000 lx at the light-receiving face |
| Température ambiante | -25 to +55 degrees -13 to +131degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +80 degrees -22 to +176degrees Fahrenheit(Note) Used at an ambient temperature of +50 degrees +122degrees Fahrenheit, or more, make sure to mount it on a metal body. |
| Consommation de courant | 15 mA or less |
| Indicateur de fonctionnement | Vermilion LED (lights up under light received condition) |
| résistance aux vibrations | 10 to 2,000 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each |
| résistance d'isolation | 50 MOhm, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Objet de détection minimal | 0.8 x 1.8 mm 0.031 x 0.071 in opaque object |
| Sortie : Opération de sortie | Incorporated with 2 outputs: Light-ON / Dark-ON |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation