

| Paramètre | Valeur |
|---|---|
| Codage | A |
| Général | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Protégé | no |
| Conception de la tête | Socket |
| Type de fil | M12 |
| Type de produit | Circular connectors (device side) |
| Type de montage | Rear mounting M16 x 1.5 With flat nut, tightening limitation |
| matériau d'étanchéité | FKM |
| Matériel de contact | CuZn |
| Type de filetage de tête | M12 |
| Sortie du câble de tête | straight |
| Type de verrouillage de la tête | Standard |
| résistance de contact | ≤ 3 mΩ |
| Nombre de prises de câble | 1 |
| Instructions de montage | With flat nut, tightening limitation |
| résistance d'isolation | ≥ 100 MΩ |
| Matériau porteur de contact | PA 6.6 |
| matériau de surface de contact | Au |
| Cycles d'insertion/retrait | > 100 |
| Matériau pour raccord à vis | Zinc die-cast, nickel-plated |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation