Heures de service : Lundi à vendredi 9h00-18h00
SF4B-A32C - SF4B-A32C PANASONIC Ultra-slim Safety Light Curtain Typ4 (PLe SIL3), Hand Protection, protective height 1270..
En stock Produit phare

SF4B-A32C

SF4B-A32C PANASONIC Ultra-slim Safety Light Curtain Typ4 (PLe SIL3), Hand Protection, protective height 1270..

$0.00USD
4654 en stock
Spécifications clés
Article:Specifications
PFHD:3.2 × 10-9(Note) Probability of dangerous failure per hour.
Câble:0.15 mm2(power line: 0.2 mm2) 8-core heat-resistant PVC cable, 5 m16.404 ftlong
MTTFD:100 years or more(Note) Mean time to dangerous failure.
Informations sur le fournisseur
PANASONIC
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique

Spécifications techniques

ParamètreValeur
ArticleSpecifications
PFHD3.2 × 10-9(Note) Probability of dangerous failure per hour.
Câble0.15 mm2(power line: 0.2 mm2) 8-core heat-resistant PVC cable, 5 m16.404 ftlong
MTTFD100 years or more(Note) Mean time to dangerous failure.
DétailsMin. sensing object ø45 mmø1.772 in(40 mm1.575 inbeam pitch)
ProduitCompact Safety Light Curtain[Type4 PLe SIL3]
MatérielEnclosure: Polycarbonate
Pas de poutre40 mm1.575 in
Accessoires-
Numéro de pièceSF4B-A32C
Nom du produitCompact Safety Light Curtain[Type4 PLe SIL3] SF4B-C
Fonction ELCAIncorporated (reducing mutual interference automatically)
Tension d'alimentation24 V DC plus or minus 10 % Ripple P-P 10 % or less
temps de réponseOFF response: 14 ms or lessON response: 80 to 90 ms
Numéro de produitSF4B-A32C
rallonge de câbleExtension up to total 50 m164.042 ftis possible for 0.2 mm2or more, cable(Note) When the synchronization+ wire (orange) and synchronization- wire (orange / black) is extended with a cable other than exclusive cable, use a 0.2 mm2or more shielded twisted pair cable.
Fonction de mise en sourdine-
Plage de fonctionnement0.3 to 7m0.984 to 22.966 ft(Note) The operating range is the possible setting distance between the emitter and the receiver.
Humidité ambiante30 to 85 % RH, Storage: 30 to 85 % RH
Élément émetteurInfrared LED (Peak emission wavelength: 850 nm0.033 mil)
Degré de pollution3
résistance aux chocs300 m / s2acceleration (30 G approx.) in X, Y and Z directions for three times each
Fonction de remplacement-
hauteur de protection1,303.4 mm51.315 in
Fonction d'interverrouillageIncorporated [Manual reset / Auto reset](Note) The manual reset and automatic reset are possible to be switched depending on the wiring status.
Altitude opérationnelle2,000 m6,561.68 ftor less(Note) Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m.
Fonctions optionnellesFixed blanking, floating blanking, light emitting amount control, auxiliary output switching, protecting, interlock setting changing, external relay monitor setting changing(Note) In case of using optional function, the handy-controller SFB-HC is required.
Éclairage ambiantIncandescent light: 3,500 liter x or less at the light-receiving face
Température ambiante-10 to +55℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: –25 to +60 ℃–3 to +140 ℉
Consommation de courantEmitter: 75 mA or lessReceiver: 95 mA or less
Objet de détection min.ø 45 mmø 1.772 inopaque object(Note) In case the blanking function is valid, the operation mode is changed.
Nombre de canaux de faisceau32
résistance aux vibrations10 to 55 Hz frequency, 0.75 mm0.030 inamplitude in X, Y and Z directions for two hours each
résistance d'isolation20 MΩ or more, with 500 V DC megger between all supply terminals connected together and enclosure
Fonction d'arrêt des émissionsIncorporated
Coupure de la sortie auxiliaire-
angle d'ouverture effectifplus or minus 2.5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / ANSI/UL 61496-2) ]
Normes applicables : JaponJIS B 9704-1 / 2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508 (SIL3)
Conformité à la directive de marquage CEMachine Directive, EMC Directive, RoHS Directive
Normes applicables : Europe (UE)EN 61496-1 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 61508-1 to 7 (SIL3), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate.
Sorties de contrôle (OSSD 1, OSSD 2)PNP open-collector transistor / NPN open-collector transistor (switching method)• Maximum source current: 200 mA• Applied voltage: Same as supply voltage (between the control output and +V)• Residual voltage: 2.5 V or less (source current 200 mA, when using 20 m65.617 ftlength cable)• Leakage current: 0.1 mA or less (Including power supply OFF condition)• Maximum load capacity: 0.22 micro F (No load to maximum output current)• Load wiring resistance: 3 Ω or less• Maximum sink current: 200 mA• Applied voltage: Same as supply voltage (between the control output and 0 V)• Residual voltage: 2.5 V or less (sink current 200 mA, when using 20 m65.617 ftlength cable)• Leakage current: 0.1 mA or less (Including power supply OFF condition)• Maximum load capacity: : 0.22 micro F (No load to maximum output current)• Load wiring resistance: 3 Ω or less
Normes applicables : Amérique du NordANSI / UL 61496-1 / 2 (Type 4), ANSI / UL 508, CAN / CSA 61496-1 / 2 (Type 4), CAN / CSA C22.2 No.14, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI / RIA 15.06(Note) The product has been safety-certified in accordance with UL, ANSI, CSA, and other standards by TÜV SÜD America, a nationally recognizedsafety laboratory (NRTL) that has been approved by the Occupational Safety and Health Administration (OSHA) as defined by 29 CFR 1910.7
fonction de surveillance des périphériques externesIncorporated
Sortie auxiliaire (sortie non sécurisée)PNP open-collector transistor / NPN open-collector transistor (switching method)• Maximum source current: 60 mA• Applied voltage: Same as supply voltage (between the auxiliary output and +V)• Residual voltage: 2.5 V or less (source current 60 mA, when using 20 m65.617 ftlength cable)• Maximum sink current: 60 mA• Applied voltage: Same as supply voltage (between the auxiliary output and 0 V)• Residual voltage: 2.5 V or less (sink current 60 mA, when using 20 m65.617 ftlength cable)
Fonction indicateur multifonctionnelle de grande taille-
Coupure de la sortie auxiliaire : Mode de fonctionnement-
Normes applicables : Corée du Sud (S-Mark)S1-G-35-2005, s2-W-11-2003
Coupure de la sortie auxiliaire : circuit de protection-
Poids net (total de l'émetteur et du récepteur)approx. 1,700 g
Normes applicables : Norme internationaleIEC 61496-1 / 2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
Résistance environnementale : Degré de protectionIP65 (IEC)
Sorties de commande (OSSD 1, OSSD 2) : Mode de fonctionnementON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal)(Note) During muting, control output will not turn off even if the beams are interrupted.(Note) When the blanking function is enabled, the operating mode will change.
Sorties de commande (OSSD1, OSSD2) : Circuit de protectionIncorporated
Sortie auxiliaire (sortie non sécurisée) : Mode de fonctionnementOFF when control outputs are ON, ON when control outputs are OFF (Factory setting, operating mode can be changed using the SFB-HC handy-controller.)
Résistance environnementale : rigidité diélectrique, tension1,000 V AC for one min. between all supply terminals connected together and enclosure
Sortie auxiliaire (sortie non protégée) : circuit de protectionIncorporated

Description du produit

More details
Caractéristiques principales
  • Qualité de niveau industriel
  • Conforme RoHS
  • Certifié CE
  • Garantie d’un an

Documents du produit

Fiche technique

Spécifications techniques et données de performance

Manuel d'utilisateur

Guide d'installation et d'utilisation

Top