


| Paramètre | Valeur |
|---|---|
| Nom (Détails) | SLD-80-56 |
| État (Détails) | New |
| Stock (Détails) | Yes |
| Format (Détails) | Box |
| Série (Détails) | SLD-80 |
| Approbations (Détails) | CCC, CE, EAC, ENEC, MM, RCM, UL |
| Puissance (W) (Détails) | 78,40 |
| Subformato (Détails) | Ballast |
| Largeur (mm) (Détails) | 30.00 |
| Hauteur (mm) (Détails) | 16.80 |
| Entrée CA max. (Détails) | 305,00 |
| Entrée CA min (Détails) | 110,00 |
| Applications (Détails) | Lighting |
| Fabricant (Détails) | MEAN WELL |
| Type de produit (Détails) | LED Driver |
| Isolement (V) (Détails) | 3.750,00 |
| Puissance crête (W) (Détails) | 78.4 |
| Connecteur d'entrée (Détails) | Quick Connector |
| Fréquence d'entrée (Détails) | 50 Hz, 60 Hz |
| Contexte/Détails (Longue durée) | 320.00 |
| Description longue (Détails) | LED driver linear with constant power.Specially designed for powering LEDs directly in a steady stream.Format compact and flat case made of plastic.Input range110-305Vca47-63Hz.Range of output constant current700-2100mA.Adjustable by external potentiometer (700-2100mA).Maximum output power rating of between1400-2100mA.Range of output voltage with current mode constant30 to 56Vccaccording to demand load and according to adjustment of the output current.Power:78,4 W.Efficiency typical:90%.Input class II without grounding.Factor corrector, power>0.95to 230vac at full load (double-stage PFC).Consumption without load <0.5 W.Operating temperature range of caseTcfrom-20ºCup+90ºC.Dimensions (Length x Width x Height):320 x 30 x 16,8 mm3 years of warranty.Manufacturer: MEAN WELL.The series SLD-80-56 are LED drivers with constant power. Give an output constant current which can be adjusted by an external potentiometer. This allows us to adjust output current between 700 and 2100mA. The range of output voltage is adjusted to get maximum power between 1400 and 2100mA. In this way we can get the maximum power output while to adjust to different current values. The sources of constant power offer a wide operating range (voltage + current), allowing to use one model for different applications with different requirements of voltage and current.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current. The output current can be adjusted via an external resistor.The series SLD are Led drivers class II non-grounded with a compact format and level. Have an input range of full and low ripple with dual stage PFC.With plastic case, the series SLD is a high efficiency designed for applications from decorative lighting, recessed luminaires, lighting panels, and signage. |
| Connecteur de sortie (Détails) | Quick Connector |
| Type d'entrée CA (Détails) | Single-phase |
| Garantie (années) (détails) | 3,00 |
| Pays d'origine (détails) | China |
| Courant de sortie mA (Détails) | 700, 750, 800, 850, 900, 950, 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, 1550, 1600, 1650, 1700, 1750, 1800, 1850, 1900, 1950, 2000, 2050, 2100 |
| Intensité de sortie minimale (mA) (Détails) | 700,00 |
| Intensité de sortie maximale (mA) (Détails) | 2.100,00 |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation