SP-480-3.3

480 W Single Output with the Function of PFC 480 W Single Output with the Function of PFC480 W Single Output with the Function of PFC SP-480series SP-480seriesSP-480series Features : Features :Features : Universal AC input / Full range Universal AC input / Full rangeUniversal AC input / Full range Built-in active PFC function,PF>0.95 Built-in active PFC function,PF>0.95Built-in active PFC function,PF>0.95 Protections: short circuit / Overload / Over voltage / Over temperature Protections: short circuit / Overload / Over voltage / Over temperatureProtections: short circuit / Overload / Over voltage / Over temperature The forced air cooling built-in DC fan The forced air cooling built-in DC fanThe forced air cooling built-in DC fan High power density 5.18 w/in3 High power density 5.18 w/in3High power density 5.18 w/in3 Low profile:43mm thickness Low profile:43mm thicknessLow profile:43mm thickness Built-in remote ON-OFF control Built-in remote ON-OFF controlBuilt-in remote ON-OFF control Built-in remote sense function Built-in remote sense functionBuilt-in remote sense function Active AC surge current limiting Active AC surge current limitingActive AC surge current limiting 3 years warranty 3 years warranty3 years warranty Bauar t gepr u f t Bauar t gepr u f tBauar t gepr u f t Sicherheit egel ma ge Sicherheit egel ma geSicherheit egel ma ge od or s od or sod or s be wacg be wacgbe wacg SPECIFICATION SPECIFICATIONSPECIFICATION MODEL MODELMODEL DC VOLTAGE RATED CURRENT CURRENT RANGE DC VOLTAGE RATED CURRENT CURRENT RANGEDC VOLTAGE RATED CURRENT CURRENT RANGE www. tuv. com www. tuv. comwww. tuv. com ID 2000000000 ID 2000000000ID 2000000000SP-480-3.3 SP-480-5SP-480-12SP-480-15SP-480-24SP-480-48 SP-480-3.3 SP-480-5SP-480-12SP-480-15SP-480-24SP-480-48SP-480-3.3 SP-480-5SP-480-12SP-480-15SP-480-24SP-480-48 3.3 V 5V12V15V24V48V 3.3 V 5V12V15V24V48V3.3 V 5V12V15V24V48V 85A85A40A32A20A10A 85A85A40A32A20A10A85A85A40A32A20A10A 0 ~ 85A0 ~ 85A0 ~ 43A0 ~ 35A0 ~ 22A0 ~ 11A 0 ~ 85A0 ~ 85A0 ~ 43A0 ~ 35A0 ~ 22A0 ~ 11A0 ~ 85A0 ~ 85A0 ~ 43A0 ~ 35A0 ~ 22A0 ~ 11A RATED POWER RATED POWERRATED POWER 280.5 W 280.5 W280.5 W 425W 425W425W 480W 480W480W 480W 480W480W 480W 480W480W 480W 480W480W Peak LOAD(10min.) Note.5280.5 W Peak LOAD(10min.) Note.5280.5 WPeak LOAD(10min.) Note.5280.5 W 425W 425W425W 516W 516W516W 525W 525W525W 528W 528W528W 528W 528W528WOUTPUT OUTPUTOUTPUT RIPPLE & NOISE (max.) Note.280mVp-p 80mVp-p 120mVp-p 150mVp-p 150mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.280mVp-p 80mVp-p 120mVp-p 150mVp-p 150mVp-p 240mVp-pRIPPLE & NOISE (max.) Note.280mVp-p 80mVp-p 120mVp-p 150mVp-p 150mVp-p 240mVp-p VOLTAGE ADJ. RANGE of VOLTAGE ADJ. RANGE ofVOLTAGE ADJ. RANGE of 2.9 ~ 3.6 4.5 V ~ 5.5 10.8 V ~ 13.2 V 13.5 ~ 18V22 ~ 27.6V41~ 56V 2.9 ~ 3.6 4.5 V ~ 5.5 10.8 V ~ 13.2 V 13.5 ~ 18V22 ~ 27.6V41~ 56V2.9 ~ 3.6 4.5 V ~ 5.5 10.8 V ~ 13.2 V 13.5 ~ 18V22 ~ 27.6V41~ 56V VOLTAGE TOLERANCE Note.32.0%2.0%1.5%1.5%1.0%1.0% VOLTAGE TOLERANCE Note.32.0%2.0%1.5%1.5%1.0%1.0%VOLTAGE TOLERANCE Note.32.0%2.0%1.5%1.5%1.0%1.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) 0.5%0.5%0.3%0.3%0.2%0.2% 0.5%0.5%0.3%0.3%0.2%0.2%0.5%0.5%0.3%0.3%0.2%0.2% 1.0%1.0%0.5%0.5%0.5%0.5% 1.0%1.0%0.5%0.5%0.5%0.5%1.0%1.0%0.5%0.5%0.5%0.5% 1000ms, 80ms/230VAC 2500ms, 80ms/115VAC at full load 1000ms, 80ms/230VAC 2500ms, 80ms/115VAC at full load1000ms, 80ms/230VAC 2500ms, 80ms/115VAC at full load 18ms/230VAC18ms/115VAC at full load 18ms/230VAC18ms/115VAC at full load18ms/230VAC18ms/115VAC at full load VOLTAGE RANGE Note.7 85 ~ 264VAC120 ~ 370VDC VOLTAGE RANGE Note.7 85 ~ 264VAC120 ~ 370VDCVOLTAGE RANGE Note.7 85 ~ 264VAC120 ~ 370VDCINPUT INPUTINPUT PROTECTION PROTECTIONPROTECTION FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.)FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENTAC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD ofOVERLOADOVER VOLTAGE OVER VOLTAGEOVER VOLTAGE 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz PF>0.95/230VAC PF>0.98/115VAC at full load PF>0.95/230VAC PF>0.98/115VAC at full loadPF>0.95/230VAC PF>0.98/115VAC at full load 74% 79% 85% 85% 88% 89% 74% 79% 85% 85% 88% 89%74% 79% 85% 85% 88% 89% 6.5 A/115VAC3.5A/230VAC 6.5 A/115VAC3.5A/230VAC6.5 A/115VAC3.5A/230VAC 20A/115VAC40A/230VAC 20A/115VAC40A/230VAC20A/115VAC40A/230VAC <2mA / 240VAC <2mA / 240VAC<2mA / 240VAC 87 ~ 103 87 ~ 103A 45.15 ~ 58.05 A 36.75 ~ 47.25 A 23.1 ~ 29.7 A 11.55 ~ 14.85 A Protection type : Constant current limiting, recovers automatically after conditions is removed 87 ~ 103 87 ~ 103A 45.15 ~ 58.05 A 36.75 ~ 47.25 A 23.1 ~ 29.7 A 11.55 ~ 14.85 A Protection type : Constant current limiting, recovers automatically after conditions is removed87 ~ 103 87 ~ 103A 45.15 ~ 58.05 A 36.75 ~ 47.25 A 23.1 ~ 29.7 A 11.55 ~ 14.85 A Protection type : Constant current limiting, recovers automatically after conditions is removed 3.8 ~ 4.45 5.75 V ~ 6.75 13.8 V ~ 16.2 V 18 ~ 21V 28.8 ~ 33.6 57.6 V ~ 67.2 V 3.8 ~ 4.45 5.75 V ~ 6.75 13.8 V ~ 16.2 V 18 ~ 21V 28.8 ~ 33.6 57.6 V ~ 67.2 V3.8 ~ 4.45 5.75 V ~ 6.75 13.8 V ~ 16.2 V 18 ~ 21V 28.8 ~ 33.6 57.6 V ~ 67.2 V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recoverProtection type : Shut down o/p voltage, re-power on to recover MOST of TEMPERATURENote.4Shut down o/p voltage, recovers automatically after temperature goes down MOST of TEMPERATURENote.4Shut down o/p voltage, recovers automatically after temperature goes downMOST of TEMPERATURENote.4Shut down o/p voltage, recovers automatically after temperature goes down THE ROLE OF ENVIRONMENT THE ROLE OF ENVIRONMENTFUNCTION ENVIRONMENTSAFETY & EMC SAFETY AND EMCSAFETY AND EMC (Note 6) (Note 6)(Note 6)OTHER OTHEROTHER REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY REMOTE CONTROL WORKING TEMP. WORKING HUMIDITYREMOTE CONTROL WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., The MOISTURE STORAGE TEMP., The MOISTURESTORAGE TEMP., The MOISTURE TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATIONTEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSIONSAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGINGPACKAGING RC+/RC-: 0 ~ 0.8 V=power on ; 4 ~ 10V=power off RC+/RC-: 0 ~ 0.8 V=power on ; 4 ~ 10V=power offRC+/RC-: 0 ~ 0.8 V=power on ; 4 ~ 10V=power off -20 ~ +60 ° c (Refer to "Reduction Curve") -20 ~ +60 ° c (Refer to "Reduction Curve")-20 ~ +60 ° c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH -40 ~ +85℃, 10 ~ 95% RH-40 ~ +85℃, 10 ~ 95% RH 0.03%/c (0 ~ 50 ° c) 0.03%/c (0 ~ 50 ° c)0.03%/c (0 ~ 50 ° c) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approvedUL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:Short I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:ShortI/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:Short I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), light industry level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), light industry level, criteria ACompliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), light industry level, criteria A 120.5 K hrs min.MIL-HDBK-217F (25c) 120.5 K hrs min.MIL-HDBK-217F (25c)120.5 K hrs min.MIL-HDBK-217F (25c) 278*127*43 mm (L*W*H) 278*127*43 mm (L*W*H)278*127*43 mm (L*W*H) 1.7 Kg; 6pcs/11.3 Kg/0.67 CUFT 1.7 Kg; 6pcs/11.3 Kg/0.67 CUFT1.7 Kg; 6pcs/11.3 Kg/0.67 CUFTNOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. TSW1: Detecton heat sink powertransistor. 4. TSW1: Detecton heat sink powertransistor.4. TSW1: Detecton heat sink powertransistor. TSW2: Detecton heat sink of output diode. TSW2: Detecton heat sink of output diode.TSW2: Detecton heat sink of output diode. 5. 33% duty cycle maximumwithin every 30 minutes.Average output powershould does not exceed the ratedpower. 5. 33% duty cycle maximumwithin every 30 minutes.Average output powershould does not exceed the ratedpower.5. 33% duty cycle maximumwithin every 30 minutes.Average output powershould does not exceed the ratedpower. 6. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in 6. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in6. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in a 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how to a 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how toa 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how to to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com) to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com) 7. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 7. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.7. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.File name:SP-480-SPEC2015-10-12 File name:SP-480-SPEC2015-10-12File name:SP-480-SPEC2015-10-12