

| Paramètre | Valeur |
|---|---|
| 164 Years (SN 29500 standard, temperature 40°C, duty cycle 34.25%) | |
| MTTF | 378 Years (SN 29500 standard, temperature 25°C, duty cycle 21%) |
| Profondeur | 130 mm |
| Largeur | 45 mm |
| Hauteur | 130 mm |
| Signal | ± 2 kV (Ethernet) |
| tension | 10 V |
| Altitude | ≤ 5000 m (See manufacturer's statement for operating height limitations) |
| Matériel | Polycarbonate |
| Quantité | 4 |
| entrée | ± 2 kV (Test Severity 3) |
| Impédance | 50 Ω |
| Gestion | Web-based management |
| Certificat | CE Compliance |
| Critère A | Normal service behavior within the specified limits. |
| Critère B | Transient alteration of service behavior, which is corrected by the device itself. |
| Observation | Criterion B |
| application | Ethernet |
| Type de réseau | Mobile radio telephony |
| Type de produit | Mobile Radio Router |
| Interface SIM | 1.8 V, 3 V |
| Force du champ | 10 V/m |
| Mode de fonctionnement | LTE (CAT16) |
| Tension d'alimentation | 10 V DC ... 30 V DC (via plug-in push-in terminal) |
| Type de connexion | Push-in spring connection |
| Gamme de fréquences | 2100 MHz (5G NR NSA, n1) |
| Schéma dimensionnel | |
| Indice de protection | IP20 |
| Type de montage | Rail mounting |
| Nombre d'entrées | 4 |
| Nombre de sorties | 2 |
| Nombre de canaux | 4 |
| Description du billet | Digital Input |
| Protocoles auxiliaires | ARP, DHCP, DNS, DynDNS, PING (ICMP), SMTP(S), NTP, SSL/TLS, STARTTLS, SMS |
| Sortie de dénomination | Digital Output |
| Téléchargez notre formulaire de contact | ± 6 kV (Test Severity 3) |
| Séparation galvanique | Ethernet // PE |
| Protocoles pris en charge | TCP/IP, UDP/IP, HTTP(S), (S)FTP |
| Longueur de transmission | 100 m (shielded twisted pair) |
| Tension du signal d'entrée | 10 V DC ... 30 V DC |
| Section du conducteur AWG | (Converted according to IEC) |
| Compatibilité pays | Europe |
| Signal de sortie actuel | ≤ 50 mA (Not Short Circuit Resistant) |
| Description de l'interface | 5G (NR) / 4G (LTE Advanced Pro) / 3G (HSPA+) |
| Tension du signal de sortie | 10 V DC ... 30 V DC (depending on operating voltage) |
| débit de transmission de données | 2.1 GBit/s (5G NR SA, DL) |
| Rejet dans l'air | ± 8 kV (Test Severity 3) |
| Résistance aux interférences | EN 61000-6-2 |
| Débit de transmission en série | 10/100/1000 MBits/s, auto-negotiation |
| Normes/Spécifications | EN 61000-4-2 |
| Instructions d'installation | To achieve all frequency combinations and maximum receive power, always use four antennas. |
| Longueur à désisoler | 9 mm |
| Niveau de commutation de signal « 1 » | 10 V DC ... 30 V DC |
| niveau de commutation du signal « 0 » | < 8 V DC |
| Absorption typique du courant | 300 mA (24 V DC) |
| Section de fil flexible [AWG] | 26 ... 16 |
| Température ambiante (Service) | -40 °C ... 70 °C |
| Compatibilité électromagnétique | Compliance with RED Directive 2014/53/EU |
| Point terminal rigide à ligne unique | 0.14 mm² ... 1.5 mm² |
| Humidité de l'air admissible (service) | 10 % ... 95% (non-condensing) |
| Point terminal à ligne unique/flexible | 0.14 mm² ... 1.5 mm² |
| Température ambiante (stockage/transport) | -40 °C ... 85 °C |
| Interférences radio selon la norme EN 55011 | Class B Field of application in industry and in housing |
| Humidité de l'air admissible (stockage/transport) | 10 % ... 95% (non-condensing) |
| Puissance dissipée maximale en condition nominale | 7.2 W |
| Tension parasite selon EN 55011 | Class B Field of application in industry and in housing |
| Section conductrice flexible avec embout de protection et gaine plastique | 0.25 mm² ... 0.75 mm² |
| Section conductrice flexible avec embout de protection, sans gaine plastique | 0.25 mm² ... 1.5 mm² |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation