En stock Produit phare
UDP102AM
UDP102AM DP102AM DP-102A-M PANASONIC Pressure sensor, -1 to 10bar, 0,6 to 5V, NPN, Pressure connector short ..
$0.00USD
4860 en stock
Spécifications clés
Article:Specifications
Poids:Net weight: 30 g approx., Gross weight: 120 g approx.
Détails:Short pressure port type
Afficher:4 digits + 4 digits 3-color LCD display(Display refresh rate : 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Poids | Net weight: 30 g approx., Gross weight: 120 g approx. |
| Détails | Short pressure port type |
| Afficher | 4 digits + 4 digits 3-color LCD display(Display refresh rate : 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| Produit | Dual Display Digital Pressure Sensor [For Gas] |
| Matériel | Enclosure : PBT (glass fiber reinforced), LCD display : Acrylic, Pressure port : Stainless steel (SUS303), Mounting threaded part : Brass (nickel plated), Switch part : Silicone rubber |
| Indicateur | Orange LED(Comparative output 1 operation indicator : Lights up when comparative output is ON, Analog voltage output operation indicator : Lights up when setting) |
| Protection | IP40 (IEC) |
| Accessoires | CN-14A-C2 (Connector attached cable 2 m6.562 ft): 1pc. (excluding M8 plug-in connector type) |
| Numéro de pièce | DP-102A-M |
| longueur du câble | Total length up to 100 m328.084 ft(less than 30 m98.425 ftwhen conforming to CE marking) is possible with 0.3 mm2, or more, cable |
| Nom du produit | Dual Display Digital Pressure Sensor [For Gas] DP-100 |
| Entrée externe | <NPN output>ON voltage : 0.4 V DC or lessOFF voltage : 5 to 30 V DC, or openInput impedance : 10 kΩ approx.Input time : 1 ms or more |
| Numéro de produit | DP-102A-M |
| Tension d'alimentation | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Humidité ambiante | 35 to 85 % RH (No dew condensation or icing allowed), Storage : 35 to 85 % RH |
| Fluide applicable | Non-corrosive gas |
| résistance aux chocs | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Type de pression | Gauge pressure |
| Méthode de connexion | Connector |
| Consommation d'énergie | Normal operation :720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode :480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage) |
| Production comparative | <NPN output>NPN open-collector transistor- Maximum sink current : 100 mA- Applied voltage : 30 V DC or less (between comparative output and 0 V)- Residual voltage : 2 V or less (at 100 mA sink current) |
| Plage de pression définie | -0.101 to +1.010 MPa-101 to +1,010 kPa-1.03 to +10.30 kgf/cm2-1.01 to +10.10 bar-14.6 to +146.4 psi |
| Température ambiante | -10 to +50 ℃+14 to +122 ℉, Storage : -10 to +60 ℃+14 to +140 ℉ |
| Plage de pression nominale | -0.100 to +1.000 MPa |
| résistance aux vibrations | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each(when panel is mounted: 10 to 150 Hz frequency, 0.75 mm0.030 inamplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each) |
| Sortie de courant analogique | Output current : 2.4 to 20 mAZero point : 4 mA ±5 % F.S.Span : 17.6 mA ±5 % F.S.Linearity : within ±1 % F.S.Load resistance : 250 Ω (max.) |
| Sortie de tension analogique | Output voltage : 0.6 to 5 VZero point : within 1 V ±5 % F.S.Span : within 4.4 V ±5 % F.S.Linearity : within ±1 % F.S.Output impedance : 1 kΩ approx. |
| résistance d'isolation | 50MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| résistance à la pression | 1.5 MPa |
| caractéristiques de température | Within ±1 % F.S.(at +20 ℃+68 ℉) |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Sortie comparative : Hystérésis | Minimum 1 digit (variable)(however, 2 digits when using psi unit) |
| Sortie comparative : Modes de sortie | EASY mode / Hysteresis mode / Window comparator mode |
| Résultats comparatifs : Répétabilité | ±0.2 % F.S.(within ±2 digits) |
| Résultat comparatif : Temps de réponse | 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation |
| Affichage : Plage de pression affichable | -0.101 to +1.010 MPa-101 to +1,010 kPa-1.03 to +10.30 kgf/cm2-1.01 to +10.10 bar-14.6 to +146.4 psi |
| Sortie comparative : Opération de sortie | NO / NC (selectable by key operation) |
| Sortie comparative : Protection contre les courts-circuits | Incorporated |
Description du produit
DP100 series dual digital pressure controller, flat model, multifunction, -0.1 to 1MPa, NPN. Port M5.
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
