En stock Produit phare
UEQ512-T
UEQ512-T EQ512 EQ-512 PANASONIC Trigonometric diffuse reflective type 1m, NPN/ PNP, Screw terminal type
$0.00USD
3611 en stock
Spécifications clés
Article:Specifications
Câble:Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in
Sortir:NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Poids:Net weight: 85 g approx.
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in |
| Sortir | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Poids | Net weight: 85 g approx. |
| Détails | DC-voltage |
| Produit | Adjustable Range Reflective Photoelectric Sensor |
| Matériel | Enclosure: ABSFront cover: PolycarbonateDisplay cover: Polycarbonate |
| Accessoire | Adjusting screwdriver: 1 pc. |
| Hystérèse | 10 % or less of operation distance(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Protection | IP67 (IEC) |
| Numéro de pièce | EQ-512 |
| longueur du câble | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cabtyre cable. |
| Nom du produit | Adjustable Range Reflective Photoelectric Sensor EQ-500 |
| Mode de détection | Switchable either BGS or FGS function |
| temps de réponse | 2 ms or less |
| Numéro de produit | EQ-512 |
| Tension d'alimentation | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Fonction de minuterie | - |
| Plage réglable | 0.2 to 1.0 m0.656 to 3.281 ft(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m0.328 ft, or more, away.(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
| Humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Élément émetteur | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, modulated) |
| résistance aux chocs | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Méthode de connexion | Screw-on terminal connection |
| Régulateur de distance | 2-turn mechanical adjuster with indicator |
| Élément récepteur | 2-segment photodiode |
| Éclairage ambiant | Incandescent light: 3,000 Lx or less at the light-receiving face |
| Température ambiante | –20 to +55 ℃–4 to +131℉(No dew condensation or icing allowed),Storage: –30 to +70 ℃–22 to +158℉ |
| Indicateur de fonctionnement | Orange LED (lights up when the output is ON) |
| Indicateur de stabilité | Green LED (lights up under stable operating condition) |
| résistance aux vibrations | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| résistance d'isolation | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Sortie : Opération de sortie | Switchable either Detection-ON or Detection-OFF |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Consommation d'énergie / de courant | 45 mA or less |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Sortie : Protection contre les courts-circuits | Incorporated |
| Fonction de prévention automatique des interférences | Incorporated(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| Portée de détection (à la distance de réglage maximale) | 0.1 to 1.0 m0.328 to 3.281 ft(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
Description du produit
Trigonometric photoelectric sensor, direct detection with background suppression, range 1m, power supply 12-24VDC, selectable NPN/PNP output, IP67, FGS and BGS functions
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
