


| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
| Sortir | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) |
| Poids | Net weight: 20 g approxGross weight: 45 g approx |
| Détails | Retroreflective[Side sensing] |
| Produit | Ultra-compact Photoelectric Sensor |
| Matériel | Enclosure: Polyethylene terephthalateLens: Polyalylate |
| Accessoire | RF-200 (Reflector): 1 pcAdjusting screwdriver: 1 pc |
| Hystérèse | - |
| Protection | IP67 (IEC) |
| Numéro de pièce | EX-29B |
| Nom du produit | Ultra-compact Photoelectric Sensor EX-20 Ver.2 |
| temps de réponse | 0.5 ms or less |
| Portée de détection | 30 to 200 mm 1.181 to 7.874 in(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque. |
| Numéro de produit | EX-29B |
| Objet de détection | dia. 15 mm dia. 0.591 in or more opaque or translucent object(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque.(Note) Make sure to confirm detection with an actual sensor before use. |
| Tension d'alimentation | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| rallonge de câble | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. |
| Humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Élément émetteur | Red LED (modulated) |
| résistance aux chocs | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Éclairage ambiant | Incandescent light: 3,000 lx or less at the light-receiving face |
| Température ambiante | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit |
| Consommation de courant | 13 mA or less |
| Indicateur de fonctionnement | Orange LED (lights up when the output is ON) |
| Indicateur de stabilité | Green LED (lights up under stable light received condition or stable dark condition) |
| Réglage de la sensibilité | Continuously variable adjuster |
| résistance aux vibrations | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (20 G max.) in X, Y and Z directions for two hours each |
| résistance d'isolation | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| commutateur de mode de fonctionnement | - |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Résultat : Catégorie d'utilisation | DC-12 or DC-13 |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Sortie : Protection contre les courts-circuits | Incorporated |
| Élément émetteur : longueur d'onde d'émission maximale | 680 nm 0.027 mil |
| Répétabilité (perpendiculaire à l'axe de détection) | 0.5 mm 0.020 in or less |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation