En stock Produit phare
UEXF1
UEXF1 EXF1 EX-F1 PANASONIC Pipe mountable liquid level sensor, NPN, 12-24 V DC
$0.00USD
4826 en stock
Spécifications clés
Article:Specifications
Câble:0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long
Sortir:NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Poids:Net weight: 15 g approx., Gross weight: 60 g approx.
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | 0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long |
| Sortir | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Poids | Net weight: 15 g approx., Gross weight: 60 g approx. |
| Détails | Amplifier built-in, Pipe-mountable |
| Produit | Pipe-mountable Liquid Level Detection Sensor |
| Matériel | Enclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone |
| Accessoire | Tying band: 2 pcs., Anti-slip tube: 2 pcs. |
| Numéro de pièce | EX-F1 |
| Nom du produit | Pipe-mountable Liquid Level Detection Sensor EX-F1 |
| temps de réponse | 2 ms or less |
| Numéro de produit | EX-F1 |
| Objet de détection | Liquid(Note):Unclear or highly viscous liquid may not be detected stably. |
| Tension d'alimentation | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
| rallonge de câble | Extension up to total 50 m164.042 ftis possible with 0.3 mm2, or more, cable. |
| Humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Élément émetteur | Infrared LED (modulated) |
| résistance aux chocs | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Éclairage ambiant | lncandescent light: 3,000 lx or less at the light-receiving face |
| Température ambiante | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃-4 to +158 ℉(Note：Liquid being detected should also be kept within the rated ambient temperature range.) |
| Consommation de courant | 30 mA or less(Note：Unclear or highly viscous liquid may not be detected stably.) |
| Indicateur de fonctionnement | Red LED (lights up when the output is ON) |
| résistance aux vibrations | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| résistance d'isolation | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Sortie : Opération de sortie | Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON) |
| Diamètre de tuyau applicable | Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe[PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ](Note：Do not use the sensor with pipes other than the above specified.) |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Sortie : Protection contre les courts-circuits | Incorporated |
Description du produit
Sensor for liquid level in transparent tubes, between 6 and 13mm Ø, built-in amplifier, NPN, selectable Light-On/Dark-ON, 12-24 V DC
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
