En stock Produit phare
UFX101CC2
UFX101CC2 FX101CC2 FX-101-CC2 PANASONIC Fiber amplifier, Standard type, NPN, display, connector type, 2m cab..
$0.00USD
4205 en stock
Spécifications clés
Article:Specifications
Sortir:NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current)
Poids:Net weight: 15 g approx.Gross weight: 75 g approx.
Détails:Standard type [Cable set]
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Sortir | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current) |
| Poids | Net weight: 15 g approx.Gross weight: 75 g approx. |
| Détails | Standard type [Cable set] |
| Produit | Digital Fiber Sensor |
| Matériel | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| Accessoire | FC-FX-1(Protection cover): 1 pc. (Note)CN-14A-C2 (Connector attached cable, 2 m6.562 ftlong): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| Numéro de pièce | FX-101-CC2 |
| longueur du câble | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Nom du produit | Digital Fiber Sensor FX-100 |
| temps de réponse | Emission frequency 0: 250 micro s or less (factory default setting)Emission frequency 1: 450 micro s or lessEmission frequency 2: 500 micro s or lessEmission frequency 3: 600 micro s or less |
| Entrée externe | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +2 V DC(Source current 0.5 mA or less)- Input impedance: 10 kOhm approx. |
| Numéro de produit | FX-101-CC2 |
| Tension d'alimentation | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Fonction de minuterie | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| Affichage numérique | 4 digits (green) + 4 digits (red) LCD display |
| Humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| résistance aux chocs | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Méthode de connexion | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| Consommation d'énergie | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| Éclairage ambiant | Incandescent light: 3,000 lx or less at the light-receiving face |
| Température ambiante | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| Indicateur de fonctionnement | Orange LED (lights up when the output is ON) |
| Réglage de la sensibilité | 2-point teaching / Limit teaching / Full-auto teaching |
| résistance aux vibrations | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| résistance d'isolation | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Sortie : Opération de sortie | Selectable either Light-ON or Dark-ON, at SET mode |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Élément émetteur (modulé) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Sortie : Protection contre les courts-circuits | Incorporated |
| Fonction de réglage de la quantité d'émission | 3-level + Auto setting (from production in December 2007) |
| Fonction de prévention des interférences | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2 or 3)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values.However, the interference prevention function does not operate at emission frequency 0 (factory default setting). |
| fonction de réglage fin de la sensibilité | Incorporated |
Description du produit
FX100 Amplifier F. Optical, NPN output, includes cable CN14AC2
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
