En stock Produit phare
UFX311P
UFX311P FX311P FX-311P PANASONIC Fiber amplifier, PNP, 12-turn potentiometer, connector type
$0.00USD
3228 en stock
Spécifications clés
Article:Specifications
Sortir:PNP open-collector transistor• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)]
Poids:Net weight: 15 g approx., Gross weight: 20 g approx.
Détails:PNP output
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Sortir | PNP open-collector transistor• Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade)• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)] |
| Poids | Net weight: 15 g approx., Gross weight: 20 g approx. |
| Détails | PNP output |
| Produit | Manually Set Fiber Sensor |
| Matériel | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate |
| Numéro de pièce | FX-311P |
| longueur du câble | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Nom du produit | Manually Set Fiber Sensor FX-311 |
| temps de réponse | 250 μs or less (STD / S-D), 2 ms or less (LONG) selectable with selection switch |
| Numéro de produit | FX-311P |
| Tension d'alimentation | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Fonction de minuterie | Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective |
| Humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| résistance aux chocs | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
| Méthode de connexion | Connector(Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft) |
| Consommation d'énergie | 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage) |
| Éclairage ambiant | Incandescent light: 3,000 ℓx at the light-receiving face |
| Température ambiante | -10 to +55 ℃ -14 to +131 ℉(If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed)Storage: -20 to +70 ℃ -4 to +158 ℉ |
| Indicateur de fonctionnement | Orange LED (lights up when the output is ON) |
| Indicateur de stabilité | Green LED (lights up under stable light received condition or stable dark condition) |
| Réglage de la sensibilité | 12-turn potentiometer with indicator (Pointer part: red backlight)(Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted. |
| résistance aux vibrations | 10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each |
| résistance d'isolation | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Sortie : Opération de sortie | Selectable either Light-ON or Dark-ON, with selection switch |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Élément émetteur (modulé) | Red LED |
| Sortie : Protection contre les courts-circuits | Incorporated |
| Fonction de prévention automatique des interférences | Incorporated (Up to 4 sets of fiber heads can be mounted close together.)(Note):When the power supply is switched on, the emission timing are automatically set for interference prevention. |
| Élément émetteur (modulé) : Longueur d'onde d'émission maximale | 650 nm 0.026 mil |
Description du produit
FX-311 Amplifier F. Optics, red led, PNP, 12-24 VDC, connector
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
