En stock Produit phare
UFX501P
UFX501P FX-501P PANASONIC Fiber amplifier, PNP, 1 digital output, double display, connector type
$0.00USD
3186 en stock
Spécifications clés
Article:Specifications
Câble:-
Sortir:PNP open-collector transistor- Maximum source current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (Note 2) (at maximum source current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
Poids:Net weight: 15 g approx.Gross weight: 70 g approx.
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | - |
| Sortir | PNP open-collector transistor- Maximum source current: 100 mA (Note 1)- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 2 V or less (Note 2) (at maximum source current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Poids | Net weight: 15 g approx.Gross weight: 70 g approx. |
| Détails | Standard type |
| Produit | Digital Fiber Sensor |
| Matériel | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Accessoire | FX-MB1 (Amplifier protection seal): 1 set |
| Protection | IP40 (IEC) |
| Numéro de pièce | FX-501P |
| Nom du produit | Digital Fiber Sensor FX-500 Ver.2 |
| temps de réponse | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Entrée externe | - |
| Numéro de produit | FX-501P |
| Tension d'alimentation | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Fonction de minuterie | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective |
| rallonge de câble | - |
| Divers environnements | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Consommation d'énergie | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage) |
| Température ambiante | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 16 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Réglage de la sensibilité | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Sortie : Points de sortie | 1 point |
| Sortie : Opération de sortie | Switchable either Light-ON or Dark-ON by L/D mode |
| Fonction minuterie : Période de la minuterie | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Élément émetteur (modulé) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Sortie : Protection contre les courts-circuits | Incorporated |
| Fonction de réglage de la quantité d'émission | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Fonction de prévention des interférences | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| Fonction d'entrée externe possible | - |
| Plage d'affichage de l'intensité lumineuse incidente | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Entrée externe (commutable avec la sortie 2) | - |
Description du produit
FX-500 Amplifier F. Optical, PNP output, dual display, high sensitivity and detection distance, ultra-fast.
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
