


| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | 0.2 m0.656 ft4-core shielded cable with round connectors |
| Détails | Measurement width 10 mm0.394 in/ Slim type |
| Produit | Sensor heads |
| Matériel | Case: Die-cast aluminum, Light emitting and light receiving surfaces: Glass |
| Linéarité | ±0.12 % F.S. (Installation distance: 20 mm0.787 in)±0.28 % F.S. (Installation distance: 100 mm3.937 in)(Note)Indicates an error with the ideal straight line of digital measured values. |
| Poids net | Emitter: 30 g approx., Receiver: 25 g approx. |
| Numéro de pièce | HG-T1110 |
| source lumineuse | Red semiconductor laser: Class 1 [IEC / EN / JIS / GB / KS / FDA](Note)This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
| Nom du produit | Thru-beam Type Digital Displacement Sensor HG-T |
| Répétabilité | 1 μm0.039 mil(Installation distance: 20 mm0.787 in)2.5 μm0.098 mil(Installation distance: 100 mm3.937 in)5 μm0.197 mil(Installation distance: 500 mm19.685 in)(Note)This is the P-P value of digital measurement value with half shading at the middle position of the installation distance. |
| Numéro de produit | HG-T1110 |
| Méthode de mise à la terre | Capacitor grounding |
| Degré de pollution | 2 |
| Largeur de mesure | 10 mm0.394 in |
| Altitude opérationnelle | 2,000 m6,561.68 ftor less(Note)Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Objet de détection min. | ø0.5 mmø0.020 in(Installation distance: 500 mm19.685 in)(Note)When the light is blocked at the center position of 500 mm19.685 ininstallation distance. |
| Indicateur de fonctionnement | Emitter : Laser radiation indicator (Green)Receiver : Judgment output indicator (Orange / Green) |
| Contrôleur applicable | HG-TC101 (-P), HG-TC111 (-P), HG-TC113 |
| distance d'installation | 0 to 500 mm0 to 19.685 in |
| Conformité réglementaire | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA regulations |
| méthode de détection de position | CMOS-based |
| Caractéristiques de température | ±0.03 % F.S./℃(Note)When the light is half-blocked at the center position of 100 mm3.937 ininstallation distance. |
| Résistance environnementale : Protection | IP67 (IEC) (Excluding connectors) |
| Résistance environnementale : humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Résistance environnementale : Résistance aux chocs | 196 m/s2acceleration in X, Y and Z directions three times each |
| Résistance environnementale : Éclairement ambiant | Incandescent light: 5,000 ℓx or less at the light-receiving face(Note)When the sampling cycle of the controller is set to "standard sampling". |
| Résistance environnementale : Température ambiante | -10 to +45 ℃+14 to +113 ℉(No dew condensation or icing allowed), Storage: -20 to +60 ℃-4 to +140 ℉ |
| Résistance environnementale : Résistance aux vibrations | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Résistance environnementale : Résistance d'isolation | 20 MΩ or higher, using 250 V DC megger (between all terminals and case) |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation