En stock Produit phare
UHGTC101
UHGTC101 HG-TC101 PANASONIC HG-T Laser Displacement Sensor. High functionality master controller, NPN output
$0.00USD
4052 en stock
Spécifications clés
:When communication unitis connected
Article:Specifications
Câble:0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong
Détails:Master unit / High performance type
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| When communication unitis connected | |
| Article | Specifications |
| Câble | 0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong |
| Détails | Master unit / High performance type |
| Produit | Controller |
| Matériel | Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal |
| Poids net | 140 g approx. |
| Numéro de pièce | HG-TC101 |
| 1 à 7 unités | 1 to 6 units |
| Nom du produit | Thru-beam Type Digital Displacement Sensor HG-T |
| 8 à 15 unités | 7 to 14 units |
| Gamme d'affichage | -199.999 to 199.999 mm-7.874 to 7.874 in |
| Taux d'échantillonnage | 1 ms (standard sampling) / 0.5 ms (high-speed sampling) |
| Numéro de produit | HG-TC101 |
| Tension d'alimentation | 24 V DC ±10 %, including ripple 0.5 V (P-P) |
| Degré de pollution | 2 |
| Résolution d'affichage | 1 μm0.039 mil |
| Altitude opérationnelle | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Consommation de courant | 100 mA or less (when sensor head is connected)(Note) : Current consumption does not include analog current output. |
| Conformité réglementaire | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Tête de capteur applicable | HG-T1010、HG-T1110 |
| commutation d'entrée externe | Input 1, Input 2, and Input 3 can be switched to "Preset / Reset / Trigger", "Bank Input A / Bank Input B / Select (Preset, Reset, Trigger)", or "Laser emission stop". |
| commutation de sortie externe | Output 1, Output 2, and Output 3 can be switched to 3-value, 2-value, Logic, and Logic 2. |
| Nombre moyen (temps de réponse) | 1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Nombre d'unités esclaves connectées | Maximum sink current and sourcecurrent of control output |
| Fonction de prévention des interférences | Incorporated(Note) : This function operates for each set of 4 connected controllers. |
| Résistance environnementale : Protection | IP40(IEC) |
| Sortie analogique : Sortie de courant analogique | •Current output range: 4 to 20 mA/F.S. (default value)•Linearity: ±0.25 % F.S.•Output when alarm occurs: 0 mA•Load impedance: 250 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| Sortie analogique : Sortie de tension analogique | •Voltage output range: 1 to 5 V/F.S. (default value)•Linearity: ±0.05 % F.S.•Output when alarm occurs: 5.2 V•Output impedance: 100 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| Entrée externe (Entrée 1, Entrée 2, Entrée 3) | Non-contact input or NPN open-collector transistor•Input conditionsInvalid: +8 V to +V DC or open, Valid: 0 to +1.2 V DC•Input impedance: 10 kΩ approx.Non-contact input or PNP open-collector transistor•Input conditionsInvalid: 0 to +0.6 V DC or open, Valid: +4 V to +V DC•Input impedance: 10 kΩ approx. |
| Nombre maximal de contrôleurs connectables | Up to 15 slave units can be connected to a master unit.(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
| Résistance environnementale : humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Résistance environnementale : Résistance aux chocs | 98m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Sortie de contrôle (Sortie 1, Sortie 2, Sortie 3) | NPN open-collector transistor•Maximum sink current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 1.5 V or less (at 50 mA sink current)•Leakage current: 0.1 mA or lessPNP open-collector transistor•Maximum source current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and +V)•Residual voltage: 1.5 V or less (at 50 mA source current)•Leakage current: 0.1 mA or less(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Résistance environnementale : Température ambiante | -10 to +50 ℃+14 to +122 ℉(No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃-4 to +140 ℉(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Résistance environnementale : Résistance aux vibrations | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2(58 to 150 Hz) in X, Y and Z directions for two hours each |
| Résistance environnementale : Résistance d'isolation | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Résistance environnementale : tenue en tension | 1,000 V AC for one minute between all supply terminals connected together and enclosure |
| Entrée externe (Entrée 1, Entrée 2, Entrée 3) : Temps d'entrée | • Trigger input: 2 ms or more (ON)• Laser emission stop input, preset input, reset input, bank input A/B(Note): 20 ms or more (ON)(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Sortie de contrôle (Sortie 1, Sortie 2, Sortie 3) : Sortie d'alarme | Open when alarm occurs |
| Sortie de contrôle (Sortie 1, Sortie 2, Sortie 3) : Sortie de jugement | N.O. / N.C. switching type |
| Sortie de commande (Sortie 1, Sortie 2, Sortie 3) : Protection contre les courts-circuits | Incorporated (automatic reset type) |
Description du produit
HG-TC101_Controller_Thru-beam Type Digital Displacement Sensor HG-T_Master unit / High performance type
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
