En stock Produit phare
UHLG112AC5
UHLG112AC5 HL-G112-A-C5 PANASONIC Compact Laser Displacement Sensor, Standard type, 120 mm, cable 5 m
$0.00USD
4040 en stock
Spécifications clés
Article:Specifications
Taper:Standard type
Câble:0.1mm210-core cabtyre cable, 5 m16.404 ftlong
Remarque:Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃+68 ℉, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic and analog measurement values.
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Taper | Standard type |
| Câble | 0.1mm210-core cabtyre cable, 5 m16.404 ftlong |
| Remarque | Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃+68 ℉, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic and analog measurement values. |
| Poids | Net weight: 70 g approx. (not including cable), 320 g approx. (including cable)Gross weight: 380 g approx. |
| Détails | Sensor head (Standard type) |
| Produit | Compact Laser Displacement Sensor |
| Matériel | Enclosure: PBTFront cover: AcrylicCable: PVC |
| Accessoire | Warning label: 1 set |
| Linéarité | ± 0.1 % F.S. |
| Résolution | 8 μm0.315 mil |
| Entrées multiples | Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.In case NPN output is selected, Function varies according to the time 0 V is connected NPN.In case PNP output is selected, Function varies according to the time external power + is connected. |
| Numéro de pièce | HL-G112-A-C5 |
| source lumineuse | Red semiconductor laser, Class 2 (IEC / EN / JIS / GB / KS / FDA (Note：This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.Max. output: 1 mW (Peak emission wavelength: 655 nm0.026 mil) |
| Nom du produit | Compact Laser Displacement Sensor HL-G1 |
| Entrée de synchronisation | NPN output operates when 0V is connected and NPN is set. (It depends on the setting.)PNP output operates when external power + is connected and PNP is set. (It depends on the setting.) |
| Diamètre du faisceau | 1.0 × 1.5 mm0.039 x 0.059 in(Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2(13.5 %) of the center light intensity. Ifthere is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than thesensing point itself, then the results may be affected. |
| Taux d'échantillonnage | 200 μs, 500 μs, 1 ms, 2 ms |
| Numéro de produit | HL-G112-A-C5 |
| Tension d'alimentation | 24 V DC ± 10 % including ripple 0.5 V (P-P) |
| Affichage numérique | Red LED 5 digit display |
| Plage de mesure | ± 60 mm± 2.362 in |
| Indicateur : Alarme | Orange LED lights up when this product cannot measure because of insuffienct or excessive light intensity. |
| Élément récepteur | CMOS image sensor |
| Altitude opérationnelle | 2,000 m6561 ftor less |
| Consommation de courant | 100 mA or less |
| Degré de pollution | 2 |
| résistance d'isolation | 20 MOhm , or more, with 250 V DC between all supply teminals connected together and enclosure |
| Conformité réglementaire | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Sortie analogique : Courant | Output range: 3.2 to 20.8 mA (normal), 21.6 mA (alarm)Load impedance: 300 Ω or less |
| Sortie analogique : Tension | Output range: 0 to +10.5 V (normal), 11 V (alarm)Output impedance: 100 Ohm |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Indicateur : Émission laser | Green LED (lights up during laser emission) |
| distance entre les centres de mesure | 120 mm4.724 in |
| Caractéristiques de température | ± 0.08 % F.S. / ℃ |
| Indicateur : Plage de mesure | Three yellow LED |
| entrée de réglage de la polarité de sortie | NPN open collector output operates when 0 V is connected.PNP open collector output operates when 24 V DC is connected. |
| Sorties (SORTIE 1, SORTIE 2, SORTIE 3) | Judgment output or alarm output (Setting can be selected.)Selectable NPN transistor open-collector or PNP transistor open-collector<In case of using NPN output>-Maximum sink current: 50 mA-Applied voltage: 3 to 24 V DC (between output and 0 V)-Residual voltage: 2 V or less (at 50 mA of sink current)<In case of using PNP output>-Maximum source current: 50 mA-Residual voltage: 2.8 V or less (at 50 mA of source current) |
| Résistance environnementale : Protection | IP67 |
| Résistance environnementale : humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Résistance environnementale : Résistance aux chocs | 500 m/s2acceleration (50 G approx.) in X,Y and Z directions three times each |
| Résistance environnementale : Éclairement ambiant | Incandescent light: 3,000 liter x or less at the light-receiving face(Note) The fluctuation by ambient illuminance is ± 0.1 % F.S. or less. |
| Résistance environnementale : Température ambiante | -10 to +45 ℃+14 to +113 ℉(No dew condensation allowed), Storage: -20 to +60 ℃-4 to +140 ℉ |
| Résistance environnementale : Résistance aux vibrations | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm0.059 indouble amplitude in X,Y and Z directions for two hours each |
| Sortie (OUT 1, OUT 2, OUT 3) : Opération de sortie | Opened when the amount of light is insufficient. |
| Sortie (OUT 1, OUT 2, OUT 3) : Protection contre les courts-circuits | Incorporated (automatic restoration) |
Description du produit
CMOS class 2 measuring laser, IP67, Diffuse Reflection, built-in display and amplifier, 2 s. analog, 3 selectable digital outputs PNP/NPN, standard model, measurement range: 120 ± 60 mm, resolution: 8
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
