En stock Produit phare
UHLT1005A
UHLT1005A HLT1005A HL-T1005A PANASONIC HL-T1 sensor heads, 5 mm type
$0.00USD
3084 en stock
Spécifications clés
Article:Specifications
Taper:Sensing width 5 mm0.197 intype
Câble:0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong
Poids:Emitter: 15 g approx.Receiver: 15 g approx.
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Taper | Sensing width 5 mm0.197 intype |
| Câble | 0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong |
| Poids | Emitter: 15 g approx.Receiver: 15 g approx. |
| Détails | Sensor head (Sensing width 5 mm0.197 intype) |
| Produit | Ultra-compact Laser Collimated Beam Sensor |
| Matériel | Enclosure: PolyetherimideCase cover: PolycarbonateFront cover: Glass |
| Accessoire | MS-HLT1-1(Sensor head mounting bracket): One set of two brackets for both the emitter and the receiverCN-HLT1-1(Sensor head to controller connection cable): 1 cableLaser beam alignment sticker: 2 pcs.Label set (FDA regulations conformed type only): 1 set |
| Numéro de pièce | HL-T1005A |
| Nom du produit | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
| Portée de détection | ■■【In the case of(0 to 500 mm 0to 19.685 in)】■■Sensing width:ø1 mmø0.039 inMin. sensing object:ø8 micro mø0.315 milopaque objectRepeatability (During the state in which light is half blocked):4 micro m0.157 mil(Note：In case of an average sampling rate of 64 times.)Linear output resolution:4 micro m0.157 mil(Note) In case of an average sampling rate of 64 times.(Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width.(Note：This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mmø0.039 in.)■■【In the case of (500 to 2,000 mm19.685 to 78.74 in)】■■Sensing width:ø1 to ø2.5 mmø0.039 to ø0.098 inMin. sensing object:ø50 micro mø1.969 milopaque objectRepeatability (During the state in which light is half blocked): -Linear output resolution: -- |
| Numéro de produit | HL-T1005A |
| rallonge de câble | Extension up to total 10 m32.808 ftis possible, with the optional cable. |
| Degré de pollution | 3 (industrial environment) |
| Indicateur d'émission | Green LED (lights up during laser emission) |
| Contrôleur applicable | HL-AC1, HL-AC1P |
| résistance d'isolation | 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Fonction de prévention des interférences | Two units of sensors can be mounted close together. (When the controller interference prevention function is used) |
| Résistance environnementale : humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Résistance environnementale : Résistance aux chocs | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Résistance environnementale : Éclairement ambiant | Incandescent light: 10,000 liter x or less at the light-receiving face |
| Résistance environnementale : Température ambiante | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉ |
| Résistance environnementale : Résistance aux vibrations | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Élément émetteur : type conforme à la réglementation FDA | Red semiconductor laser Class II (FDA)(modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm0.026 mil)(IEC / JIS: Class 1) |
| Élément émetteur : type conforme aux normes CEI/JIS | Red semiconductor laser Class 1 (IEC / JIS)(modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm0.026 mil) |
Description du produit
HLT1 Series Analog Barrier Laser Emitter-Clevy, 5mm Beam Width, 500mm Range
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
