Heures de service : Lundi à vendredi 9h00-18h00
ULX101 - ULX101 LX101 LX-101 PANASONIC Digtal mark sensor, teach-in, NPN, cable 2m
En stock Produit phare

ULX101

ULX101 LX101 LX-101 PANASONIC Digtal mark sensor, teach-in, NPN, cable 2m

$0.00USD
3356 en stock
Spécifications clés
Article:Specifications
Câble:0.34 mm25-core cabtyre cable, 2 m6.562 ftlong
Poids:Net weight: 120 g approxGross weight: 180 g approx
Détails:Cable type
Informations sur le fournisseur
PANASONIC
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique

Spécifications techniques

ParamètreValeur
ArticleSpecifications
Câble0.34 mm25-core cabtyre cable, 2 m6.562 ftlong
PoidsNet weight: 120 g approxGross weight: 180 g approx
DétailsCable type
ProduitDigital Mark Sensor
MatérielEnclosure: PBTDisplay cover: PolycarbonateOperation buttons: Silicone rubberLens: GlassLens holder: Aluminum
AccessoireM4 (length 30 mm1.181 in) screw with washers: 2 pcs.
taille du spot1 x 5 mm 0.039 x0.197 in(at 10 mm0.394 insetting distance)
ProtectionIP67 (IEC)
Numéro de pièceLX-101
Nom du produitDigital Mark Sensor LX-100
Sortie 1 (OUT)NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 50 mA sink current)
Sortie 2 (OUT)NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 50 mA sink current)
temps de réponseMark mode: 45 micro s or lessColor mode: 150 micro s or less
Portée de détection10 ± 3 mm0.394 ± 0.118 in
Numéro de produitLX-101
Tension d'alimentation12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Apports pédagogiquesNPN non-contact input- Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less)- Input impedance: 10 kOhm approx.
Fonction de minuterieIncorporated with variable ON-delay / OFF-delay timer,switchable either effective or ineffective(Timer period: 1 to 500 ms, 9 levels variable)
rallonge de câbleExtension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable.
Affichage numérique4-digit red LED display
Humidité ambiante35 to 85 % RH, Storage: 35 to 85 % RH
Élément émetteurCombined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm0.025 mil/ 525 nm0.021 mil/ 470 nm0.019 mil)
résistance aux chocs500 m/s2acceleration (50 G approx.) in X, Y and Z directionsthree times each
Éclairage ambiantIncandescent light: 3,000 lx or less at the light-receiving face
Température ambiante-10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉
Consommation de courantNormal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
Réglage de la sensibilitéMark mode: 2-level teaching / Full-auto teachingColor mode: 1-level teaching
résistance aux vibrations10 to 500 Hz frequency, 3.0 mm0.118 indouble amplitude (max. 20 G) in X, Y and Z directions for two hours each
tenue en tension1,000 V AC for one min. between all supply terminals connected together and enclosure
Sortie 1 : Opération de sortieMark mode: Light-ON / Dark-ON (Auto-setting on teaching)Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
Sortie 2 : Opération de sortieInverted operation of the output 1
Conformité à la directive de marquage CEEMC Directive, RoHS Directive
Sortie 1 : Protection contre les courts-circuitsIncorporated
Sortie 2 : Protection contre les courts-circuitsIncorporated
fonction de réglage fin de la sensibilitéIncorporated

Description du produit

Sensor for mark/color detection, automatic RGB optical LED selection, cable, NPN
Caractéristiques principales
  • Qualité de niveau industriel
  • Conforme RoHS
  • Certifié CE
  • Garantie d’un an

Documents du produit

Fiche technique

Spécifications techniques et données de performance

Manuel d'utilisateur

Guide d'installation et d'utilisation

Top