En stock Produit phare
UNA111PN-T
UNA111PN-T NA111PN NA1-11-PN PANASONIC Cross-beam area sensor, 1 m sensing range 12-24V DC, PNP
$0.00USD
3988 en stock
Spécifications clés
Article:Specifications
Câble:0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong
Sortir:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Poids:Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx.
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Sortir | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Poids | Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx. |
| Détails | PNP output |
| Produit | Small / Slim Object Detection Area Sensor |
| Matériel | Enclosure: Heat-resistant ABSLens: AcrylicIndicator cover: Acrylic |
| Protection | IP62 (IEC) |
| Numéro de pièce | NA1-11-PN |
| Nom du produit | Small / Slim Object Detection Area Sensor NA1-11 |
| hauteur de l'élément | 10 mm0.394 in |
| temps de réponse | In Dark state: 5 ms or lessIn Light state: 10 ms or less |
| Portée de détection | 0.17 to 1 m0.558 to 3.281 ft(Note：The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) |
| Numéro de produit | NA1-11-PN |
| Détection de la hauteur | 100 mm3.937 in |
| Objet de détection | ø13.5 mmø0.531 inor more opaque object(Note：Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) |
| Tension d'alimentation | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| rallonge de câble | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. |
| Humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Élément émetteur | Infrared LED (Peak emission wavelength: 880nm0.035mil, cross-beam scanning system) |
| Degré de pollution | 3 (Industrial environment) |
| résistance aux chocs | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Indicateurs : Émetteur | Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
| Éclairage ambiant | Incandescent light: 3,000 lx or less at the light-receiving face |
| Température ambiante | -10 to 55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Consommation de courant | Emitter: 80 mA or lessReceiver: 100 mA or less |
| Indicateurs : Récepteur | Operation indicator: Orange LED (lights up when the output is ON)Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
| résistance aux vibrations | 10 to 150 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| résistance d'isolation | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Sortie : Opération de sortie | ON or OFF when beam channel is interrupted, selectable by operation mode switch |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Résultat : Catégorie d'utilisation | DC-12 or DC-13 |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Sortie : Protection contre les courts-circuits | Incorporated |
| Nombre d'éléments émetteurs/récepteurs | 11 Nos. each on the emitter and the receiver, respectively |
Description du produit
CROSSBEAM AREA SENSOR, detection range 1 meter, 12-24 VDC, PNP
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
