En stock Produit phare
UNA1PK5PN-T
UNA1PK5PN-T NA1PK5PN NA1-PK5-PN PANASONIC Area sensor, 0.1 to 1.2 m, 25 mm pitch, bright indic.., PNP,12-24V
$0.00USD
4937 en stock
Spécifications clés
Article:Specifications
Câble:0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong
Sortir:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Poids:Net weight: Emitter 80 g approx., Receiver 85 g approx.Gross weight: 270 g approx.
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Sortir | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Poids | Net weight: Emitter 80 g approx., Receiver 85 g approx.Gross weight: 270 g approx. |
| Détails | PNP output [Standard type] |
| Produit | Ultra-slim Body Picking Sensor |
| Matériel | Enclosure: Heat-resistant ABSLens cover: AcrylicIndicator cover: Acrylic |
| Pas de poutre | 25 mm0.984 in |
| Protection | IP62 (IEC) |
| Numéro de pièce | NA1-PK5-PN |
| Nom du produit | Ultra-slim Body Picking Sensor NA1-PK5/NA1-5 |
| temps de réponse | 10 ms or less (when the interference prevention is used, in Light state: 30 ms or less, in Dark state: 13 ms or less) |
| Portée de détection | 0.1 to 1.2 m0.328 to 3.937 ft(0.05 to 0.5 m0.164 to 1.640 ftwhen set to SHORT)(Note) The sensing range is the possible setting distance between the emitter and the receiver. |
| Numéro de produit | NA1-PK5-PN |
| Détection de la hauteur | 100 mm3.937 in |
| Objet de détection | ø35 mmø1.378 inor more opaque object(completely beam interrupted object) |
| Tension d'alimentation | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| rallonge de câble | Extension up to total 100 m328.084 ftis possible for both emitter and receiver with 0.3 mm2, or more, cable. |
| Humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Élément émetteur | Infrared LED(Peak emission wavelength: 950 nm0.037 mil, synchronized scanning system) |
| Degré de pollution | 3 (Industrial environment) |
| résistance aux chocs | 490 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Consommation d'énergie | Emitter: 0.6 W or lessReceiver: 0.9 W or less(Note) Obtain the current consumption by the following equation.Current consumption = Power consumption / Supply voltage(e.g.) When the supply voltage is 12 V, the current consumption of the emitter is0.5 W / 12 V ≈ 0.042 A = 42 mA |
| Indicateurs : Émetteur | Power indicator: Green LED (lights up when the power is ON)Job indicator: Orange LED (lights up or blinks when the job indicator input is High, lighting pattern is selected by operation mode switch) |
| Éclairage ambiant | Incandescent light: 3,000 lx or less at the light-receiving face |
| Température ambiante | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Indicateurs : Récepteur | Operation indicator: Red LED (lights up when one or more beam channels are interrupted, but lights up when two beam channels or more are interrupted in the double-beaminterruption mode)Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)Job indicator: Orange LED (lights up or blinks when the job indicator input is High, lighting pattern is selected by operation mode switch) |
| résistance aux vibrations | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| résistance d'isolation | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Nombre de canaux de faisceau | 5 beam channels |
| Sortie : Opération de sortie | ON or OFF when one or more beam channels are interrupted / ON or OFF when two or more beam channels are interrupted, selectable by operation mode switch |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Résultat : Catégorie d'utilisation | DC-12 or DC-13 |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Sortie : Protection contre les courts-circuits | Incorporated |
| Fonction de prévention des interférences | Incorporated |
Description du produit
Area sensor, 5 beams, 0.1 to 1.2m, distance between beams 25mm, indicator light, PNP
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
