


| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | 0.3 mm2 5-core cabtyre cable, 2 m 6.562 ft long |
| Sortir | Relay contact 1 c- Switching capacity: 250 V AC 1 A (resistive load), 30 V DC 2 A (resistive load)- Electrical life: 500,000 or more switching operations (switching frequency 3,600 operations/hour), 100,000 or more switching operations (switching frequency 3,600 operations/hour)- Mechanical life: 100 million or more switching operations (switching frequency 36,000 operations/hour) |
| Poids | 140 g approx. |
| Détails | Diffuse reflective |
| Produit | Compact Multi-voltage Photoelectric Sensor |
| Matériel | Enclosure: PolycarbonateLens: PolycarbonateCover: Polycarbonate |
| Accessoire | Adjusting screwdriver: 1 pc. |
| Hystérèse | 15 % or less of operation distance(Note) The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Protection | IP66 (IEC) |
| Numéro de pièce | NX5-D700A |
| Nom du produit | Compact Multi-voltage Photoelectric Sensor NX5 |
| temps de réponse | 10 ms or less |
| Portée de détection | 700 mm 27.559 in(Note) The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Numéro de produit | NX5-D700A |
| Objet de détection | Opaque, translucent or transparent object(Note) Make sure to confirm detection with an actual sensor before use. |
| Tension d'alimentation | 24 to 240 V AC +10-15 % or 12 to 240 V DC +10-15 % Ripple P-P 10 % or less |
| rallonge de câble | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable |
| Indicateur de puissance | - |
| Humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Élément émetteur | Infrared LED (modulated) |
| Degré de pollution | 3 (Industrial environment) |
| résistance aux chocs | 500 m/s2(50 G approx.) in X, Y and Z directions three times each |
| Consommation d'énergie | 2 VA or less |
| Éclairage ambiant | Incandescent light: 3,500 Lx or less at the light-receiving face |
| Température ambiante | -20 to +55 degrees -4 to +131 degrees Fahrenheit (No dew condensation or icing allowed) (Note) , Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit(Note) In case the sensor is to be used at an ambient temperature of -15 degrees +5 degrees Fahrenheit , or less, please contact our office. |
| Indicateur de fonctionnement | Red LED (lights up when the output is ON) |
| Indicateur de stabilité | Green LED (lights up under stable light received condition or stable dark condition) |
| Réglage de la sensibilité | Continuously variable adjuster |
| résistance aux vibrations | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions two hours each |
| résistance d'isolation | 20 MOhm , or more, with 500 V DC megger between power supply and output terminals, and between relay contact terminals |
| Sortie : Opération de sortie | Light-ON |
| tenue en tension | 1,500 V AC for one min. between power supply and output terminals1,000 V AC for one min. between relay contact terminals |
| Conformité à la directive de marquage CE | Low Voltage Directive, EMC Directive, RoHS Directive |
| Élément émetteur : longueur d'onde d'émission maximale | 880 nm 0.035 mil |
| Fonction de prévention automatique des interférences | Incorporated (Two units of sensors can be mounted close together.) |
| Répétabilité (perpendiculaire à l'axe de détection) | 0.3 mm 0.012 in or less |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation