En stock Produit phare
UPX23ES
UPX23ES PX23ES PX-23ES PANASONIC PX-2, auxiliary sensor type, ext. control F., 1 m, NPN
$0.00USD
4076 en stock
Spécifications clés
Article:Specifications
Câble:For input and output: 0.18 mm29-core (PX-24ES and PX-23ES: 12-core) cabtyre cable, 0.5 m1.640 ftlongFor auxiliary sensor connection: 0.18 mm210-core connector attached cabtyre cable, 0.5 m1.640 ftlong
Poids:Net weight: 210 g approx.Gross weight: 390 g approx.
Détails:Main sensors(Auxiliary sensor connectable model With external control function / Short sensing range)
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | For input and output: 0.18 mm29-core (PX-24ES and PX-23ES: 12-core) cabtyre cable, 0.5 m1.640 ftlongFor auxiliary sensor connection: 0.18 mm210-core connector attached cabtyre cable, 0.5 m1.640 ftlong |
| Poids | Net weight: 210 g approx.Gross weight: 390 g approx. |
| Détails | Main sensors(Auxiliary sensor connectable model With external control function / Short sensing range) |
| Produit | Long Range & Wide Area Photoelectric Sensor |
| Matériel | Enclosure: ABS, Lens: Acrylic, Cover: Polycarbonate |
| Accessoire | MS-PX-2 (Main sensor mounting bracket): 1 set, Adjusting screwdriver: 1 pc., Matrix chart for sensing areas and external inputs: 1 sheet |
| Hystérèse | 15 % or less of operation distance(Note：The sensing range is specified for white non-glossy paper (300 x 300 mm11.811 × 11.811 in) as the object.) |
| SORTIE1, SORTIE2 | NPN open-collector transistor・Maximum sink current: 100 mA・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)OUT2(OR circuit among the effective center, left and right OUT 2 areas) |
| Protection | IP65 (IEC) |
| Numéro de pièce | PX-23ES |
| Nom du produit | Long Range & Wide Area Photoelectric Sensor PX-2 |
| Zone de détection | Four sensing areas are selectable with dip switches. |
| temps de réponse | 80 ms or less |
| Numéro de produit | PX-23ES |
| Fonction du sommeil | Operating / sleep selectable with external input |
| Tension d'alimentation | 10 to 31 V DC including ripple |
| rallonge de câble | Extension up to total 100 m328.084 ft(10 m32.808 ftfor auxiliary sensor connection) is possible with 0.3 mm2, or more, cable. |
| Humidité ambiante | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Élément émetteur | Infrared LED (Peak emission wavelength: 950 nm0.037 mil, modulated) |
| résistance aux chocs | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Consommation d'énergie | Under operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)(Note：Obtain the current consumption by the following calculation.Current consumption = Power consumption ÷ Supply voltage(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA) |
| Éclairage ambiant | Incandescent light: 3,000 lx or less at the light-receiving face |
| Température ambiante | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -20 to +70 ℃-4 to +158 ℉ |
| Réglage de la sensibilité | Continuously variable adjusters (OUT 1, adjacent right OUT 1, adjacent left OUT 1 and OUT 2 areas are adjusted independently.) |
| résistance aux vibrations | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (20 G max.) in X, Y and Z directions for two hours each |
| résistance d'isolation | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| OUT1, OUT2 : Opération de sortie | Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.) |
| Conformité à la directive de marquage CE | EMC Directive, RoHS Directive |
| Indicateurs de fonctionnement : zone OUT 1 | Red LED (lights up when the beam is received in the effective OUT 1 areas) |
| Indicateurs de fonctionnement : zone OUT 2 | Yellow LED (lights up when the beam is received in the effective OUT 2 areas) |
| OUT1, OUT2 : Protection contre les courts-circuits | Incorporated |
| Portée de détection (zones OUT 1 et OUT 2) | 1 m3.281 ft(Note：The sensing range is specified for white non-glossy paper (300 x 300 mm11.811 × 11.811 in) as the object.) |
| Fonction de prévention automatique des interférences | Optical interference from up to 25 units is prevented. |
Description du produit
PX-2 Series. Expandable sensor for guided vehicles, external control function, range 1 m., NPN, power supply 10-31 VDC
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
