

| Paramètre | Valeur |
|---|---|
| 6ES7321-1BH10-0AA0 | |
| Note | Can be plugged onto 20-pos. I/O modules |
| Pas | 5.2 mm |
| Longueur | 1 m |
| Protégé | no |
| Isolation | Basic insulation |
| Sans halogène | no |
| Type de produit | Front adapter |
| Type de conducteur | Round cable set |
| ligne de signal AWG | 21 |
| résistance du câble | ≤ 40 Ω/km |
| résistance à la flamme | UL VW-1 |
| Méthode de connexion | Plug-in connection |
| Position de montage | any |
| Carte d'E/S compatible | 6ES7321-1BH02-0AA0 |
| Matériau conducteur | Bare Cu litz wires |
| Notes sur le fonctionnement | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| Nombre de positions | 10 |
| Tension de surtension nominale | 4 kV |
| Degré de protection | IP20 |
| Catégorie de surtension | III |
| résistance d'isolation | ≥ 20 MΩ*km |
| Nombre de connexions | 2 |
| Normes/réglementations | DIN EN 50178 |
| Gaine externe, couleur | gray |
| Mode de fonctionnement nominal | 100% operating factor |
| Gaine extérieure, matériau | PVC |
| Section transversale du conducteur | 10x 0.5 mm² |
| Tension d'isolation nominale | 260 V |
| Tension de fonctionnement (CA/CC) | ≤ 250 V AC/DC |
| Température ambiante (fonctionnement) | -20 °C ... 60 °C |
| Ligne de signal à structure conductrice | 16x 1.80 mm |
| Courant (par fil monoconducteur, 40 °C) | ≤ 6 A |
| Courant (par fil monoconducteur, 60 °C) | ≤ 4 A |
| Température ambiante (stockage/transport) | -20 °C ... 80 °C |
| Courant (Courant total par câble, 40 °C) | ≤ 20 A |
| Courant (Courant total par câble, 60 °C) | ≤ 16 A |
Spécifications techniques et données de performance
Guide d'installation et d'utilisation