En stock Produit phare
UGXHL15AP
UGXHL15AP GX-HL15A-P PANASONIC Inductive proximity sensor, rectangular type, 8.0mm, top sensing, PNP, NO, IP..
$0.00USD
3787 en stock
Spécifications clés
Article:Specifications
Câble:0.15 mm23-core oil, heat and cold resistant cabtyre cable, 1 m3.281 ftlong
Sortir:PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between output and +V)- Residual voltage: 2 V or less (at 100 mA source current)
Détails:PNP output
Informations sur le fournisseur
PANASONIC
Produits : 4316
Habituellement expédié sous 2 à 3 jours ouvrables
Qualité garantie
Livraison rapide
Support technique
Spécifications techniques
| Paramètre | Valeur |
|---|---|
| Article | Specifications |
| Câble | 0.15 mm23-core oil, heat and cold resistant cabtyre cable, 1 m3.281 ftlong |
| Sortir | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between output and +V)- Residual voltage: 2 V or less (at 100 mA source current) |
| Détails | PNP output |
| Produit | Rectangular-shaped Inductive Proximity Sensor |
| Matériel | Enclosure: PBTIndicator part: Polyester |
| Hystérèse | 20 % or less of operation distance(with standard sensing object) |
| Poids net | 20 g approx. |
| Protection | IP68 (IEC), IP68g (JEM)(Note) Panasonic Electric Works SUNX's IP68 test method1. Immerse at 0 m below 0 ℃+32 ℉water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃+158 ℉water surface and leave for 30 min.2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.3. Leave in water at a depth of 1 m3.281 ftin water for 500 hours.4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. |
| Numéro de pièce | GX-HL15A-P |
| Nom du produit | Rectangular-shaped Inductive Proximity Sensor GX-F/H |
| Répétabilité | Along sensing axis, perpendicular to sensing axis: 0.04 mm0.002 inor less |
| Numéro de produit | GX-HL15A-P |
| Tension d'alimentation | 12 to 24 V DC +10/-15 % Ripple P-P 10 % or less |
| rallonge de câble | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Humidité ambiante | 45 to 85 % RH, Storage: 35 to 95 % RH |
| résistance aux chocs | 10,000 m/s2acceleration (1,000 G approx.) in X, Y and Z directions three times each |
| Température ambiante | -25 to +70 ℃-13 to +158 ℉, Storage: - 40 to +85 ℃- 40 to +185 ※ |
| Consommation de courant | 15 mA or less |
| Indicateur de fonctionnement | Orange LED(lights up when the output is ON) |
| Portée de détection stable | 0 to 6.7 mm0 to 0.264 in(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.(Note) This is when mounted onto an insulant plate. When mounted onto a steel or stainless steel plate, insert the optional aluminum sheet between the sensor and the plate. |
| résistance aux vibrations | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (Max. 20 G) in X, Y and Z directions for two hours each |
| résistance d'isolation | 50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Distance de fonctionnement maximale | 8.0 mm0.315 inplus or minus 8 %(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.(Note) This is when mounted onto an insulant plate. When mounted onto a steel or stainless steel plate, insert the optional aluminum sheet between the sensor and the plate. |
| Fréquence de réponse maximale | 150 Hz(Note) This is when mounted onto an insulant plate. When mounted onto a metallic plate, max. response frequency will decrease. |
| Sortie : Opération de sortie | Normally open |
| Objet de détection standard | Iron sheet 30 × 30 × t 1 mm1.181 × 1.181 × t 0.039 in |
| tenue en tension | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Résultat : Catégorie d'utilisation | DC-12 or DC-13 |
| Réglementations et certifications applicables | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Variation de la plage de détection : caractéristiques de tension | Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage |
| Variation de la plage de détection : caractéristiques de température | Over ambient temperature range -25 to +70 ℃-13 to +158 ℉: Within plus or minus 8 % of sensing range at +23 ℃+73 ℉ |
Description du produit
Rectangular proximity detector, front detection, 8.0 mm. NA, PNP
Caractéristiques principales
- Qualité de niveau industriel
- Conforme RoHS
- Certifié CE
- Garantie d’un an
Documents du produit
Fiche technique
Spécifications techniques et données de performance
Manuel d'utilisateur
Guide d'installation et d'utilisation
